Electric Scooter Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.
If you want to use your existing lights, you'll need to see if your controller has an output for lighting and what voltage it supplies. For example, some are putting out the same voltage as it does for the motor...so 36v for both. In that case you'd probably have to wire in a buck converter to reduce the voltage to the 5v-12v you likely require.
What firmware is this tested on? I would assume[…]
Just wanted to update here following my successful[…]
Just to post an update to this thread, I fou[…]
I would use XT60 connectors for one. And two, the […]