A Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

App, phone, GPS, and software
User avatar
By hyacinth
Posts Avatar
#4504
Lothean wrote:
Mon Feb 11, 2019 8:06 pm
hyacinth wrote:
Mon Feb 11, 2019 8:02 pm
Lothean wrote:
Mon Feb 11, 2019 7:58 pm

Yup!
Thats not a brainless, thats the new one with GPS based unlock procedure I think. The GPS tracker is connected to the control board, can you confirm this?
This one is unlocked through Bluetooth, and contains in the box at the bottom of the scooter a simple GPS tracker device.
I was just wondering if they put another GPS elsewhere.
So it's not connected to the controlboard? Does the tracker look like this?

This is an image - REGISTER or LOGIN to view.
By Lothean
Posts
#4505
hyacinth wrote:
Mon Feb 11, 2019 8:09 pm
Lothean wrote:
Mon Feb 11, 2019 8:06 pm
hyacinth wrote:
Mon Feb 11, 2019 8:02 pm


Thats not a brainless, thats the new one with GPS based unlock procedure I think. The GPS tracker is connected to the control board, can you confirm this?
This one is unlocked through Bluetooth, and contains in the box at the bottom of the scooter a simple GPS tracker device.
I was just wondering if they put another GPS elsewhere.
So it's not connected to the controlboard? Does the tracker look like this?

This is an image - REGISTER or LOGIN to view.
Well, it was looking like this a couple of days ago indeed This is an image - REGISTER or LOGIN to view.

Same on the 3 scooters I have, also
User avatar
By hyacinth
Posts Avatar
#4506
Lothean wrote:
Mon Feb 11, 2019 8:15 pm
hyacinth wrote:
Mon Feb 11, 2019 8:09 pm
Lothean wrote:
Mon Feb 11, 2019 8:06 pm


This one is unlocked through Bluetooth, and contains in the box at the bottom of the scooter a simple GPS tracker device.
I was just wondering if they put another GPS elsewhere.
So it's not connected to the controlboard? Does the tracker look like this?

This is an image - REGISTER or LOGIN to view.
Well, it was looking like this a couple of days ago indeed This is an image - REGISTER or LOGIN to view.

Same on the 3 scooters I have, also
Okay, I thought they did something like Tier does and connects the tracker with the control board, now it's just more visible that a dedicated GPS tracker exist.
By Lothean
Posts
#4507
hyacinth wrote:
Mon Feb 11, 2019 8:18 pm
Lothean wrote:
Mon Feb 11, 2019 8:15 pm
hyacinth wrote:
Mon Feb 11, 2019 8:09 pm


So it's not connected to the controlboard? Does the tracker look like this?

This is an image - REGISTER or LOGIN to view.
Well, it was looking like this a couple of days ago indeed This is an image - REGISTER or LOGIN to view.

Same on the 3 scooters I have, also
Okay, I thought they did something like Tier does and connects the tracker with the control board, now it's just more visible that a dedicated GPS tracker exist.
So there is no other means of tracking them?

(Here's the link for the BT snoop packets, since the PMs don't seem to go through : https://mega.nz/#F!olMREYAB!lCyYlsvqB008X0a8BVqN-Q )
User avatar
By hyacinth
Posts Avatar
#4510
Lothean wrote:
Mon Feb 11, 2019 8:21 pm
hyacinth wrote:
Mon Feb 11, 2019 8:18 pm
Lothean wrote:
Mon Feb 11, 2019 8:15 pm


Well, it was looking like this a couple of days ago indeed This is an image - REGISTER or LOGIN to view.

Same on the 3 scooters I have, also
Okay, I thought they did something like Tier does and connects the tracker with the control board, now it's just more visible that a dedicated GPS tracker exist.
So there is no other means of tracking them?

(Here's the link for the BT snoop packets, since the PMs don't seem to go through : https://mega.nz/#F!olMREYAB!lCyYlsvqB008X0a8BVqN-Q )
No, the trackers purpose is to give the app and the staff a location of a scooter. And they can set a geofence so they get a notification if the scooter goes outside of the geofence. And even if the battery of the scooter dies, it can provide them with information for two days. Pretty neat stuff.
By MikeSnow
Posts
#4548
hyacinth wrote:
Tue Feb 12, 2019 6:25 am
MikeSnow wrote:
Mon Feb 11, 2019 3:29 pm
You have to solder cables because it's no standard connector.
So solder a cable to the control boards connectors?
Yes!

Just solder cables on the controller board and connect to the jtag.
This is an image - REGISTER or LOGIN to view.


Connect to the Jtag on
This is an image - REGISTER or LOGIN to view.


I used wires from my arduino project.
This is an image - REGISTER or LOGIN to view.
By Ricardo Silva
Posts
#4549
Some neat info around here, good work!!

Just to make something clear: the “old” aka brainless aka no-front-box voi has the tracker on the underside? No other tracker elsewhere? Meaning, if i were able to physically detach it and dump it in the bin, the scooter would be pretty much untracable?
User avatar
By RSB0
Posts Avatar
#4551
MikeSnow wrote:
Tue Feb 12, 2019 6:47 am
hyacinth wrote:
Tue Feb 12, 2019 6:25 am
MikeSnow wrote:
Mon Feb 11, 2019 3:29 pm
You have to solder cables because it's no standard connector.
So solder a cable to the control boards connectors?
Yes!
Has anyone tried the flash? I've allready ordered a JTAG flasher but have to wait a couple of weeks..
babass69 liked this
By kapranos
Posts
#4552
MikeSnow wrote:
Tue Feb 12, 2019 6:47 am
hyacinth wrote:
Tue Feb 12, 2019 6:25 am
MikeSnow wrote:
Mon Feb 11, 2019 3:29 pm
You have to solder cables because it's no standard connector.
So solder a cable to the control boards connectors?
Yes!

Just solder cables on the controller board and connect to the jtag.
This is an image - REGISTER or LOGIN to view.


Connect to the Jtag on
This is an image - REGISTER or LOGIN to view.


I used wires from my arduino project.
This is an image - REGISTER or LOGIN to view.

sorry, you mean we can flash the original firmware? :

https://github.com/Ch4rlus/ninebot_firmware

Using this JTAG? can you explain a little bit how the JTAG software works in order to flash the .bin files?

I can try on my WIND ES1 tomorrow,as i have one JTAG flasher like this

https://www.amazon.es/WINGONEER-Cortex- ... t+link+v2
thanks a lot!
  • 1
  • 4
  • 5
  • 6
  • 7
  • 8
  • 22

Can you share a link to the russian website? wa[…]

If this board dont work i will ask for a refund. E[…]

What exactly happened? I thought some othe[…]

@Hherbson @07Gevish https://i.imgur.com[…]