Electric Scooter Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

User avatar
By Freebird
Posts Custom LikeBB Avatar
#7188
Pez wrote:
Tue Mar 26, 2019 11:07 pm
This is one of the latest .Buffed down to the raw aluminum . Pearl Grey auto with 2 coats of clear on plastic . Flashed with firmware
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
Best scooter mod yet. How did you strip off the powdercoat?
exekiel23 liked this
By math
Posts
#7207
Freebird wrote:
Mon Apr 15, 2019 10:32 pm
Pez wrote:
Tue Mar 26, 2019 11:07 pm
This is one of the latest .Buffed down to the raw aluminum . Pearl Grey auto with 2 coats of clear on plastic . Flashed with firmware
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
Best scooter mod yet. How did you strip off the powdercoat?
I dare say he used paint stripper ?
Pez liked this
User avatar
By LAskooter213
Posts LikeBB Avatar
#7220
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.



A few of my latest kustom creations....
Also my prototype dual motor scooter (gotta get it dialed in before i refinish it). Check out the thread about overvolting to increase top speed to learn more about my attempts to create a 30 mph scooter for under $10.00.
By joeyfreshwater
Posts LikeBB
#7241
LAskooter213 wrote:
Wed Apr 17, 2019 5:49 am
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.


Kandy painted transportation in its smallest form
how do you come up with design ideas...those a dope man

i got a few kustom canz colors now i feel like i went to basic only getting just a few colors lol
User avatar
By Pez
Posts Avatar
#7245
M365 powder coat was stripped off with JASCO paint stripped (jelly) has to be brushed on and left for about 3 hours then hosed off . Then did it one more time . The Neck •Head • hand brake were done by hand with Lacquer Thinner and steel wool . Then everything was buffed out with a stand up buffer . I just finished a new Custom Dash Board cover for it .. Due to The OEM Board did not come with a cover . This is how ( OEM Boards ) come ..where I order them . Flashable with Firmware ( no downgrading bullshit ) they are ready to go plug & play .
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
User avatar
By TJSplash
Posts LikeBB LikeBB Avatar
#7260
lilscoot wrote:
Fri Mar 08, 2019 1:21 pm
my goal if it is even possible is to have 2 wheel power. 2 complete scooters so running each motor to their own controal baord, their own battery, and their own display, throttle, brake.

once i have this set up i want to add external battery packs to both controal boards.

this should end up with 4 battery packs in total.

i just want to use all primary battery packs.
the external battery packs have the same wires(positive,negative 4 smaller wires for controal board.

Will hooking a primary battery to the external battery port work?? the external battery and primary battery have the exact same specs.

if anyone has any information on anything that could help please chime in. i haven’t found anything on this topic.
Wiring batteries in parallel does not increase your output, it just extend your battery life. If you were to wire them in series, then you would have more power output, but I'm not sure if your controller can handle it
User avatar
By TJSplash
Posts LikeBB LikeBB Avatar
#7261
Pez wrote:
Tue Mar 26, 2019 11:07 pm
This is one of the latest .Buffed down to the raw aluminum . Pearl Grey auto with 2 coats of clear on plastic . Flashed with firmware
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.
Damn, you beat me to it. I was thinking about doing this and I got sidetracked from doing my scooter project. I guess I will have to give it a dope ass paint job to compete. I'm really impressed, congrats on the final product
  • 1
  • 11
  • 12
  • 13
  • 14
  • 15
  • 18

Are you sure Bird picked it up or was these guys l[…]

Where are all the M365 scoots?

too easy to hack consumer model that can't really […]

Shorted my REAL ES4 Dash .

Lyft feeds all 36V to it's dash on it's ES AND M36[…]

Anyone have oem ninebot Segway esc’s for sal[…]