A Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

By blackscampi
Posts
#7247
i have a lime scooter abondoned for 4 months on me private terrain.
i readed the topic for hours but everybody speaks about he bird models wich have es...
now i'am stuck i try to find new motherbord and dashbord for lime
is it possible now yes or no

thanks
By Keelan Matthews
Posts
#7610
Great!

BUY:

https://www.aliexpress.com/item/36V-48V ... 4c4dIWqVWb

& if you don't have them already a set of Torx Security Screw Drivers or Bits. (Star Shape * with hole in middle) - Refer to screws on scooter if you're having trouble.

Once purchased send me a message and I'll tell you all the schematics and stuff on how to connect it to the existing Lime wheel throttle etc..
fieldc0llapse, Matluba liked this
User avatar
By surveyorandrew
Posts LikeBB Avatar
#8150
Yes, it’s in the neck. Just start taking off every screw you see. You’ll take apart more than you need to but you’ll figure it out pretty quick and learn a lot.
User avatar
By yeswhat478
Posts Avatar
#8164
The battery is held in place with the two lower screws on each side of the tube (just above the two bolt clamp).
You'll want to get the tube off and then there is a metal plate with allen keys sandwiching a piece of rubber between the metal plate and battery, you'll want to take it out before the battery slides out.

I think determining the wiring schematic of the in[…]

I would be highly interested in getting into the s[…]

C'est une version maison, t'as réussi &agra[…]

1 throttle for 2 controllers

It's interesting that you would talk about using t[…]