Electric Scooter Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

Covers electric scooter models whether shared or for consumers.

By Colburn
Posts
#5985
No, the M365 and Bird Zero aren’t even remotely similar in terms of using the same circuit. Check the technology forum section for more information.

If you’re considering using the bird zero wheel on a M365 , it is possible.

You’ll need to know how to solder and have patience if you’re willing to do the conversion.
Gahnen liked this


By Colburn
Posts
#6051
07Gevish wrote:
Tue Mar 12, 2019 3:40 am
To view images REGISTER or LOGIN for full access.

Successfully converted to run.
However lights and dash not working...so it's difficult to tell the battery charge.
Used one of the generic 36v 350W controllers and simple ignition/grip throttle.
Really nice , do you have the link for those ? The ones in the technology board are dead.

As for the soldering part, you just removed the controller I assume? I’m trying to figure out where you tucked it in.

By 07Gevish
Posts LikeBB
#6052
Colburn wrote:
Tue Mar 12, 2019 12:39 pm
07Gevish wrote:
Tue Mar 12, 2019 3:40 am
To view images REGISTER or LOGIN for full access.

Successfully converted to run.
However lights and dash not working...so it's difficult to tell the battery charge.
Used one of the generic 36v 350W controllers and simple ignition/grip throttle.
Really nice , do you have the link for those ? The ones in the technology board are dead.

As for the soldering part, you just removed the controller I assume? I’m trying to figure out where you tucked it in.
https://www.amazon.com/Electric-Control ... pons&psc=1
https://www.amazon.com/gp/aw/d/B07D72MD ... UTF8&psc=1

And yes I have removed the old controller and put the replacement where the old one was. It fit with so e extra room too.
Ni Go, Luscious1, Chazz liked this

User avatar
By Pez
Posts Avatar
#6055
Man I love what you have done with the ZERO .. This is a must have item for sure . To bad everyone out in the streets are beat to hell and have bald tires front and back ..total hunks of Shit

By Colburn
Posts
#6067
Pez wrote:
Tue Mar 12, 2019 5:47 pm
Man I love what you have done with the ZERO .. This is a must have item for sure . To bad everyone out in the streets are beat to hell and have bald tires front and back ..total hunks of Shit
Where do you live ? There’s a ton in Santa Monica.
Nets187 liked this

By Colburn
Posts
#6068
07Gevish wrote:
Tue Mar 12, 2019 2:13 pm
Colburn wrote:
Tue Mar 12, 2019 12:39 pm
07Gevish wrote:
Tue Mar 12, 2019 3:40 am
To view images REGISTER or LOGIN for full access.

Successfully converted to run.
However lights and dash not working...so it's difficult to tell the battery charge.
Used one of the generic 36v 350W controllers and simple ignition/grip throttle.
Really nice , do you have the link for those ? The ones in the technology board are dead.

As for the soldering part, you just removed the controller I assume? I’m trying to figure out where you tucked it in.
https://www.amazon.com/Electric-Control ... pons&psc=1
https://www.amazon.com/gp/aw/d/B07D72MD ... UTF8&psc=1

And yes I have removed the old controller and put the replacement where the old one was. It fit with so e extra room too.
Amazing , thanks man ! Any soldering required ?

By 07Gevish
Posts LikeBB
#6114
Colburn wrote:
07Gevish wrote:
Tue Mar 12, 2019 2:13 pm
Colburn wrote:
Tue Mar 12, 2019 12:39 pm
Really nice , do you have the link for those ? The ones in the technology board are dead.

As for the soldering part, you just removed the controller I assume? I’m trying to figure out where you tucked it in.
https://www.amazon.com/Electric-Control ... pons&psc=1
https://www.amazon.com/gp/aw/d/B07D72MD ... UTF8&psc=1

And yes I have removed the old controller and put the replacement where the old one was. It fit with so e extra room too.
Amazing , thanks man ! Any soldering required ?
It's not quite plug and play. I took off the connectors from original control board and soldered them on to the new one. Also soldered the throttle connectors to the new controller. Warning. After you finished connecting controller to the motor and throttle but before you connect the battery make sure 2 dark green wires on the new controller arent connected to each other or it will cause the motor to engage as soon as you plug the battery in.

User avatar
By Pez
Posts Avatar
#6118
Would love to know if your trying to figure out the lights and dashboard ..to get them up and running . The Zero is very special ..#personalzero amazing . I’ve had Zeros do 26mph stock when I was a mechanic ..

  • 1
  • 2
  • 3
  • 4
  • 5
  • 29

I "emulated" the COM Box UART Bird k[…]

Hello, Je souhaiterais récapituler car je n[…]

Lots of questions here, post a picture of the […]

Hi, Scooter is now working. I will Share all the d[…]