[furioso86]

Not worth the effort. That's some solid cross-compatibility issues to solve with different company's tech. And hardware. And software.

Anyone know if it's possible to plug a ninebot Segway control board into a 365?

[Whiteferrett]

I ask cause I know the connections look the same and I know the 365 can run on the ninebot app

Not worth the effort. That's some solid cross-compatibility issues to solve with different company's tech. And hardware. And software.

Anyone know if it's possible to plug a ninebot Segway control board into a 365?

[dustydog256]

I had a new issue arise when I attempted to plug in my dashboard into my m365, it blew the capacitor on not one but two boards, I think maybe there is a short in the system or something else internal...any one else have ideas?

[furioso86]

Not a new issue. Did you read my post on the previous page about Lyft scooters having this issue if you don’t remove the Power Splitter first? Refer to page 9 of his thread too. Then read the thread about the difference between Bird M365s and Lyft’s versions for an instructional on how to remove the Power Splitter. (If indeed you did try this on a Lyft scooter...)

The Power Splitter is basically directing all 30+ volts into the capacitor, versus the normal 5 volts.

I had a new issue arise when I attempted to plug in my dashboard into my m365, it blew the capacitor on not one but two boards, I think maybe there is a short in the system or something else internal...any one else have ideas?

[dustydog256]

Not a new issue. Did you read my post on the previous page about Lyft scooters having this issue if you don’t remove the Power Splitter first? Refer to page 9 of his thread too. Then read the thread about the difference between Bird M365s and Lyft’s versions for an instructional on how to remove the Power Splitter. (If indeed you did try this on a Lyft scooter...)

The Power Splitter is basically directing all 30+ volts into the capacitor, versus the normal 5 volts.

I had a new issue arise when I attempted to plug in my dashboard into my m365, it blew the capacitor on not one but two boards, I think maybe there is a short in the system or something else internal...any one else have ideas?

Thanks for that, my partner found online about this, im sorry I didnt see that, ive read so much on these things, but have the answer now, thanks for the help!

[jaysinism]

Does anyone happen to know what is means if the top light on the M365 circuit board is constantly flashing?
At first it wouldn't even power off the board and unlock the scooter. I was able to get it connected in the Mi Home app and et it unlocked but it seems to lose it's connection and always having to reconnect it in the app. The top light on the circuit board is just constantly flashing.

[kapranos]

Can someone upload some photo or model of the screws of this model of brain?

https://imgur.com/a/4kqQn86

thanks in advance

[Lothean]

Can someone upload some photo or model of the screws of this model of brain?

https://imgur.com/a/4kqQn86

thanks in advance

I used a T8 bit for these
The screws are quite deep in the plastic soyou should use a long and fine bit.

[kapranos]

Can someone upload some photo or model of the screws of this model of brain?

https://imgur.com/a/4kqQn86

thanks in advance

I used a T8 bit for these
The screws are quite deep in the plastic soyou should use a long and fine bit.

Are this kind of security TORX or normal? some more bit i should know?

https://i.ebayimg.com/images/g/gNYAAOSw ... s-l300.jpg

eBay


thanks!

[Lothean]

Can someone upload some photo or model of the screws of this model of brain?

https://imgur.com/a/4kqQn86

thanks in advance

I used a T8 bit for these
The screws are quite deep in the plastic soyou should use a long and fine bit.

Are this kind of security TORX or normal? some more bit i should know?

https://i.ebayimg.com/images/g/gNYAAOSw ... s-l300.jpg


thanks!

These seem to be TH bits, but I think they'll work fine if you have the size TH8!

eBay