A Forum for Scooter Enthusiasts, Scooter Chargers, and Scooter Mechanics.

#5612
Happy you figured it out.
That red wire is for an optional on-off switch.
If you fit an on-off switch directly on the battery lead the switch and its wires has to be heavy duty enough to carry all the power the scooter needs.

Otherwise on that red wire, you can fit a lightweght switch and wire remotely on handlebar for example because that keyswitch circuit only carries small amount of power what turns on the controller electonics.
Capoiro1977, TIER liked this
#5725
Hello again I have a couple of questions, because I'm continue to investigate before mount everything on the scooter, the first is, what voltage works the front light, 5v, 7v, 11v? And where you can get the necessary voltage to work it.
And the second doubt is where I connect the cable that comes out of the battery but not the one that carries the XT60 connector, the cable that is originally connected to the motherboard and it also goes to the charging connector.
thank for your answers and I'm sorry for my ignorance regarding these issues
VascoPC liked this
#7945
carbacca wrote:
Fri Feb 22, 2019 7:37 pm
figure out the wiring through a bit of intelligent guessing, test it on the bench, and then finally splice/solder/heatshrink it properly
Keelan Matthews wrote:
Thu Feb 21, 2019 10:03 pm
How did you connect the DC Motor Controller to the Battery and controls etc..
I don’t suppose you’re just awesome and documented and blueprinted the whole conversion? Because you’d rock if you did.
#8063
no i did not write anything down
OneMadCow wrote:
Wed May 08, 2019 8:55 pm
carbacca wrote:
Fri Feb 22, 2019 7:37 pm
figure out the wiring through a bit of intelligent guessing, test it on the bench, and then finally splice/solder/heatshrink it properly
Keelan Matthews wrote:
Thu Feb 21, 2019 10:03 pm
How did you connect the DC Motor Controller to the Battery and controls etc..
I don’t suppose you’re just awesome and documented and blueprinted the whole conversion? Because you’d rock if you did.
Lyft has entered into the ES4 game

hi so how are you guys doing. well since it's so[…]

Interesting observations. I might try to re-enfo[…]

How are you guys able to flash the Chinese boards?[…]

Ahhh shit. Just found these fuckers for sale 25 mi[…]