[ray_t]

The one I ripped it's battery from is a ES400B then. I'm just in the process of converting the battery to standard XT60 connectors.

[bagnare]

hello it is easy to open just with a 5v or 12v battery or a 12v power supply then remove the carpet and remove the vices on your left there is a box detach the connectors separate the red and black wires connect them to the battery or to the 5v or 12v power supply and hoop the battery out and if you want to replace the battery, reverse the power supply

[TheElevator]

do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker? To view images REGISTER or LOGIN for full access.

[bagnare]

do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker? To view images REGISTER or LOGIN for full access.

bonjour no gps in battery solo bms thank To view images REGISTER or LOGIN for full access.

[TheElevator]

do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker? To view images REGISTER or LOGIN for full access.

bonjour no gps in battery solo bms thank To view images REGISTER or LOGIN for full access.

Tanks! To view images REGISTER or LOGIN for full access.
I will have a look at a Tier Scooter at Home To view images REGISTER or LOGIN for full access.

[TheElevator]

Q&A:
Q: Does it make any alarm noises?
A: No To view images REGISTER or LOGIN for full access.


----------------

Step 1:
Unscrew the two Security Torx.

Step 2:
Unscrew the 8 Phillips screws.

Step 3:
Remove the additional battery and the cable to the controller (inside of the pole)

Step 4:
Remove the SIM card

[TheElevator]

hello it is easy to open just with a 5v or 12v battery or a 12v power supply then remove the carpet and remove the vices on your left there is a box detach the connectors separate the red and black wires connect them to the battery or to the 5v or 12v power supply and hoop the battery out and if you want to replace the battery, reverse the power supply

Thanks, it worked To view images REGISTER or LOGIN for full access.

[TheElevator]

According to the nameplate (picture 1) it works between 33V and 60V. Just connect the red (positive) and black (negative) cable to the battery and enjoy To view images REGISTER or LOGIN for full access.


To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

[TheElevator]

I measured the pinout for the battery pack and the battery tray.


On the left you can see the "Power Out Connector".
On the right you can see the "Charge Input".
The bottom of the battery can be seen in the middle.
To view images REGISTER or LOGIN for full access.


Here is the battery tray:
To view images REGISTER or LOGIN for full access.


This is how i bridged "P1+" and "P2+", so that the battery thinks it's in the tray.:
To view images REGISTER or LOGIN for full access.


Charge Port Input:
To view images REGISTER or LOGIN for full access.


Powerconnector Output:
To view images REGISTER or LOGIN for full access.

[mayaku]

I just found this:
Batterie-Antidiebstahl-Struktur für gemeinsam nutzbaren Elektroroller
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.