An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Help, tips, technique, and frequently asked questions.

User avatar
By onoff
Posts
#15924
hello ,

you maybe have to disasemble the motor of the frame and you have to open the motor in two part to have access to the wires , then you have to use heat shrink on every wires one by one and then heat shrink over all together , or other solution , as you have to pass thought the nut with you wires it mmaybe too ticker if you use heat shrink , in this case you can change all the connection wire

By hodrodbob
Posts
#15978
I'd suggest based off the damage, you may have to open the motor and wire new cabling in directly. I would do that based off the damage

New Jump scooters

If I bypass bms, scooter usable with stock contr[…]

Bird One + controller swapping

Don't have any experience first hand with the m365[…]

NineBot Max - Attempt

I successfully converted a max last night using […]

Hi, I understand not wanting to share the sol[…]