An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
If you want to use your existing lights, you'll need to see if your controller has an output for lighting and what voltage it supplies. For example, some are putting out the same voltage as it does for the motor...so 36v for both. In that case you'd probably have to wire in a buck converter to reduce the voltage to the 5v-12v you likely require.
@x7y you forgot to install a positive switching/[…]
This is more for Spin/ Bird's with a gimped contro[…]
SO you gonna let us know if it works or what? […]
Hi I hope this is in the right place. I picked u[…]