[jamiesj410]

Is that the stock dash ?

[Ni Go]

I have a new controller arriving soon that will wire up to this new throttle....I was just wondering if someone knew how to turn on the digital unit with the existing hardware. I'll post pic when it runs. To view images REGISTER or LOGIN for full access.

Did you manage to connect your throttle ?

[jamiesj410]

Got mine going with a 500 watt controller go’s great with me I’m 220 pounds
To view images REGISTER or LOGIN for full access.

[jamiesj410]

Well, I stopped being lazy and got everything put together and working. Waiting to finish charging before I take it out for a road test.
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

How did u get the dash to work I think I burned mine up .

[jamiesj410]

I have a new controller arriving soon that will wire up to this new throttle....I was just wondering if someone knew how to turn on the digital unit with the existing hardware. I'll post pic when it runs. To view images REGISTER or LOGIN for full access.

U have to use a different throttle there like 13 bucks on amazon. The twist one with a key & lcd volts.

Did you manage to connect your throttle ?

[Scootydoo]

How did u get the dash to work I think I burned mine up .

I didnt do anything special other than fabricate longer and or duplicate wires to accommodate the new runs(also some new connections for the motor wiring) Since the internals are all from a ninebot ES(including the 3 batteries), nothing else was necessary other than flashing the dash and controller basically.

[Scootydoo]

How did u get the dash to work I think I burned mine up .

I didnt do anything special other than fabricate longer and or duplicate wires to accommodate the new runs(also some new connections for the motor wiring) Since the internals are all from a ninebot ES(including the 3 batteries), nothing else was necessary other than flashing the dash and controller basically.

Sorry I failed to answer your previous question(just noticed it now) To view images REGISTER or LOGIN for full access.


Its a standard ES dash with BLE which needed to be flashed along with the controller. What I had done was insulated it with epoxy and did away with the plastic cover completely(top n bottom to fit just right) and I secured the original rubber power button thingy just under the F350 dash cover enough so that it can now act as the powerup button when I press down on it. I was kinda proud of that little innovation of mine To view images REGISTER or LOGIN for full access.

[MaxMustermann]

Well, I stopped being lazy and got everything put together and working. Waiting to finish charging before I take it out for a road test.
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

If you have the time, would it be possible to make a detailed instruction, how to rewire everything with the new dashboard? To view images REGISTER or LOGIN for full access.

[DaMoON]

Please can U make tuto for hack f350 start end.
Many of us wait U. To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.

[John not doe]

Impressive work
I got my hand on a f350 and started disassembling it. I haven't disassembled the controler yet.

Question, I plan to keep the original battery (for now) and buy the es replacement pack (brain and display/Bluetooth). As follow :
https://s.click.aliexpress.com/e/9xezlG3AL

If I understood all your posts, I would only need to connect the bms directly to the es part? And it would react as an es2/4(if I plug an external battery)?

(I'll have to drill to fix it inside and get access to the charger part - but mechanical action aren't my problem, I'm just not a good electronician haha)

Thanks in advance To view images REGISTER or LOGIN for full access.