By rayven18 - Sun Apr 28, 2019 6:54 pm
- Sun Apr 28, 2019 6:54 pm
#7507
I have a SZ2.5 Lime that has the same board like yours. You can see 4 points on the board, 5v GND Dat Clk, if you probe them with multimeter you will get 0 Volts, BUT, if you plug in the battery and all, and from the green connector that goes to the green gps box, you short the blue wire with the red, the controller starts, and you hear a small tick from the front wheel, and then the dashboard gets 5v,gnd,clk,data, but lights dont come up. If you probe the data line with a logic analyzer, you get partial ticks, meaning that it's trying to communicate