An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
By 2S2A1H
#58194
Hi all. Is there any success with the snsc 2.4 model?
I haven't figured out how to connect to ecs yet.
Image
Image
Image
By 2S2A1H
#58195
Hello. Today there is a solution for flashing and unlocking snsc 2.4
Image
Image
Image
By 2S2A1H
#58196
Does anyone have any positive news on resolving the firmware issue?
By bluemeanie223
#58253
Connect with cmsis dap And use arterytek isp.
Or stlink V2 and openocd
Enjoy
By Sc00tr
#58255
bluemeanie223 wrote:
Wed Nov 22, 2023 10:27 am
Connect with cmsis dap And use arterytek isp.
Or stlink V2 and openocd
Enjoy
But what do you flash to it lol connecting doesn't do much unless you have something to send to it
By Risitas98
#58398
I have an older design 2.3 controller but with an at32 chip. So the pcb layout is the same as older flashable ones wit stm32, the only visible difference is the at32 chip. I managed to flash a retail at32 firmware with rollerplausch downgrade software but it doesn't work (it shutdown instantly when I'm not pressing the button). It manages to react with bluetooth, I can flash firmwares on it but it cannot be used...The only solution is to install shfw but it's made to brick 2.3 controllers...
By isabido
#58440
Risitas98 wrote:
Thu May 16, 2024 8:01 pm
I have an older design 2.3 controller but with an at32 chip. So the pcb layout is the same as older flashable ones wit stm32, the only visible difference is the at32 chip. I managed to flash a retail at32 firmware with rollerplausch downgrade software but it doesn't work (it shutdown instantly when I'm not pressing the button). It manages to react with bluetooth, I can flash firmwares on it but it cannot be used...The only solution is to install shfw but it's made to brick 2.3 controllers...
HI @Risitas98, I have this SNSC 2.3 ESC which if you power it the red light comes on and the green one flashes, I have tried to connect via STLINK and I have not been able to in any way, seeing your comment that there are ESCs with old designs and AT32 I'm thinking if this could be the case. Is there a way to find out with the references that I gave you in the images, or do you have to necessarily remove the damn gelatin






By isabido
#58442
Finally I was able to connect and it is actually an STM32. Thanks anyway.

Below is the link with some information about […]

Tier ES400 unlock development

Swooping in from outer-space. Please stop making c[…]