Well i m a bit Desperate this is my storie:
I have bought this controller on Ali:
https://fr.aliexpress.com/item/40003004 ... 6c37YoUt16
I know i should have bought an 500w (my mistake)
So i have plugged all cables and follow carrefully all thread from this post:
1/ First it was working like a charm i have rid for a 10km ride no issue
2/ After I did ride a bit longer but with lof of slope and the controler was quite hot and I get a E10 error and throttle not working (could not make it work)
I switch it off during 2 houurs cool down and it works again
I think there were an issue so i did :
a) the green study cable = nothing still I got ta E07 error
b) inversed the green and blue line from motor line - it works and then motor vibrating violently
so I have tried all combination of the 3 colors (blue yellow green)
c) and then again : E07 error
Nothing is working anymore !
When i switch it on it make like a TIC TIC TIC sounds from the wheels motor and i get stuck with E07 error
when i activate the throttle it makes again the TIC TIC TIC sounds?
Did I make something wrong?
If anyone could help me who have a better solution?
This is all my wired cables
I have remove tape from some of them to better see and I have add WAGGO in order to make the cable switch from motor lines
this is all setting from LCD parameters:
this is my wiring (i have respect all matching colors):
ON THIS VIDEO YOU CAN HEAR THE TIC TIC TIC SOUNDS: