An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Enjoy the juice
By Jevako030
dijkie wrote:
Thu Jan 20, 2022 4:52 pm
locking mechanism in closed and open position.
beeing driven by a 5V motor
Motor is beeing driven by small PCB, this one is connected to the Blue connector.
Can you now open and close the lock with 5 V. Combination of the 4 wires, Without Canbus ?
User avatar
By Eratz
I also like to know if the bms still does its job balancing even if you bypass it or i should change it.
Got one of this battery from a friend who found it lying on the street.
By dijkie
no, it is in need of a signal to unlock.

i am going to build in a cable to open the lock when needed.
once installed and can charge the battery while in the scooter, you don't need to remove it.
i wanted to open it to change the BMS, then i will install it, locked, with the cable hidden inside the steer handle
  • 1
  • 8
  • 9
  • 10
  • 11
  • 12
  • 28
Good Scooter for under $500?

I would recommend Bytech International’s GXL[…]

Are you sure its 05. and not an 06 error […]

anyone know what this 05e error means? I was able […]

Hi. So I have my m365 already flashed, running wil[…]