reload8 wrote: ↑Mon Aug 16, 2021 5:27 pm
SuperNova, could you provide a pic of the scooter with the 500w controller? I'm currently working on a 3d printed solution to place it on the outside, as I find it too big for the original location.
I don't have pictures of it, but what i did is, i unscrewed the battery from its original location, cut some of the outside plastic shell of the battery(not too much, only where the screws sits), broke the metal tabs where the battery originally screws to the scooter and fill the wholes with silicone, removed the plastic holder of the original controller, but when you do this there will be an opening in the back of the scooter and it will fill with dirt and water which isnt good. So i took kinda thin sheet of aluminum and fitted it in this place as a barrier and isolated it with silicone. Also i think i did cut some of the case of the controller and glue it so it wont get any water inside. When you do all this you have to take some styrofoam and fit it inside so the batter and the controller wont move and rattle when you go over bumps.
Like i said, its a process and its a pain in the *ss, but it can be done.