An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
#52674
Meantime I check the wiring and pinout.
I've connected a third party controller and all Is working. Just some issue with the front light (maybe broken) and rear light (there Is positive, ground and signal. Maybe is for flashing. I Need to check the Board).

Some news from your side ? To view images REGISTER or LOGIN for full access.
miloniko liked this

#52734
jeppo17 wrote:
Wed Feb 24, 2021 2:18 am
Meantime I check the wiring and pinout.
I've connected a third party controller and all Is working. Just some issue with the front light (maybe broken) and rear light (there Is positive, ground and signal. Maybe is for flashing. I Need to check the Board).

Some news from your side ? To view images REGISTER or LOGIN for full access.
Hy m8 To view images REGISTER or LOGIN for full access.


Sorry for late reply!

Great news, and great job!!!
First of all - I tried on my side on software side - good news To view images REGISTER or LOGIN for full access.


But first your work: can you send me some pics, how you wired the debugging test (TX, RX) arduino? I can try it then on my side too, as I said, I am not really specialist on hardware side...
What 3rd party controller did you used? and how did you connected?

On my side: I succeeded to connect to scooter with my own app To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.

I am not ready yet, but I can:
- Connect via bluetooth
- Unlock the scooter with a specific code (encrypt/decrypt)
- Read / write codes to scooter like, turn lights on/off, set max speed, cruise control etc. etc.

But as I said, I have not a release version of the app, and currently only on android sytem. I will try to post a video of my app itself...

My next step is: if you send me your "hardware" part information, I will try with andruino (or what ever) to send the specific codes too, because I think I can understand "what the scooter is talking about" To view images REGISTER or LOGIN for full access.

But some codes I do not understand, like: current speed, mileage, driven km, and so on and so on. The bluetooth service ist pretty simple created, but I do not know how to find out, what every characteristics does on ByteArray side...
jeppo17, mayaku liked this

#52762
Hi Milo,

great great news !!! To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.
To view images REGISTER or LOGIN for full access.

very good job

if you want to send the .apk I can try just with an old smartphone to stay offline and connect directly with the scooter!

From my side, to be faster I've used a standard USB rs485

https://www.italtronik.it/adattatore-co ... p-169.html

To view images REGISTER or LOGIN for full access.


Is much simple-
About connection, for sure the main power 36V to the board (8 pin connector, 36V IN and one of the GND of the board , in my case near the 10 pin connector).
And for the bus 485A and 485B from the 8 pin connector.
Nothing else...

By RobertD
Posts
#52866
Is there any update on the app? You can unlock any electric scooter just with the app? Thanks for the work!

BIRD ZERO ELECTISAN F350

Hi to all... Have someone right values for GT-10[…]

How to increase top speed

Hello, I recently bought a LCD S866, 450W 48V cont[…]

Wheels Battery removal

Obviously since there is a keylock

Somebody has had to figure out how to hack these[…]