07Gevish wrote: ↑
Tue Feb 12, 2019 3:28 am
jventura wrote: ↑
Sun Feb 10, 2019 12:47 am
Is tear down the same for the Bird Zero as the M365 to get the wheel off?
Very similar, open the battery compartment disconnect motor and battery, remove side covers for the front wheel and remove the screws securing the fork and 2 bolts holding the front wheel. It's not necessary but would make it easier if you remove the control module unit under the stem before proceeding with a tear down. Will give you more space to work around and remove the wiring.
did you rewire the inside or the connection to the cb?
there are a ton of extra wires on the cb so i went with rewiring the motor and im stuuck. the break controls the throttle and when i switch it around they both fail. does that extra connection where the white cable is soldered to do something important ? >.<