By humanbeing21 - Tue Dec 11, 2018 8:45 pm
- Tue Dec 11, 2018 8:45 pm
#2908
If this works similar to the Xiaomi MIJIA M365 then we'll be able to simply remove the Lime hardware, plug in the dashboard, and reset the control unit.
Great picture, I've been looking for something like this. All your images appear to of the hardware Lime put on the Segway scooters to make them work with their platform. All of this will be removed when we convert the scooter back to it's original form. The connections on the lime board look identical to those on the dashboard circuit board from eBay.Zik wrote: ↑Tue Dec 11, 2018 6:56 am
1. Charging port
2. This is connected through the tube to the lower part of the scooter
3. Dashboard connection
4. Connection to battery
5. Goes down through the tube to the lower part of scooter passing by a long rail just in front of battery.
6. To battery
7. That cable was unplugged. I assume to connect directly to a kind of programing interface.
8. That cable goes to GPS module, I assume one of them brings the signal to the motherboard to turn on the scooter.
If this works similar to the Xiaomi MIJIA M365 then we'll be able to simply remove the Lime hardware, plug in the dashboard, and reset the control unit.