An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.


#22977
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
Zou liked this



#23013
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
To flash the original 4 led dashboard, I need to remove the c2 capacitor like in the original g30 right? And btw I wasn't able to flash the scooter. I soldered everything correctly but it shows me target not found or st link communication error


#24779
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it

#24792
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number

#24805
Risitas98 wrote:
Wed Sep 16, 2020 11:13 am
kenned-skov wrote:
Tue Sep 15, 2020 1:40 pm
Maczilla wrote:
Sat Aug 22, 2020 12:38 pm
1. Flash bms on P10 with iAp CP2102 UART to USB adapter
2. Flash esc 126 full dump by 3 wires to STLink and plug-in power in charge port.
3. Flash ble 555 full dump by 3 wires to STLink and plug-in power to the Dashboard by scooter.
do you have the flash files for all 3 things ??? send me message if you have or where i can get it
Don't lose time it will not work unless you found a way to loop the motherboard into reset mode like they did with ninebot g30 and snsc 2.0 boards. And to flash bms you also need to dismount the whole battery pack. Iap bms flashing change only the version number
what can i els dooo with it ?? maybe motherboard from max G30 ?

Torrents: Stream [url=https:/www.treu1453.xyz/jap[…]

The Simpsons

Torrents: Stream Moi, Grosse - Avant-Premi&#[…]

Chat IRC

Torrents: Download [url=https:/www.mrmovie.site/c[…]

Hello, do you it it is possible to read the Hall S[…]