An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
By Risitas98
Posts LikeBB LikeBB
#22669
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS To view images REGISTER or LOGIN for full access.


Any tips, Please?
There is a special key to unlock uart flashing on snsc 2.3
Idk how to find it but without that you can use it only with an arduino that emulate the gps board on the rental firmware.

#22758
Risitas98 wrote:
Fri Aug 14, 2020 5:27 pm
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS To view images REGISTER or LOGIN for full access.


Any tips, Please?
There is a special key to unlock uart flashing on snsc 2.3
Idk how to find it but without that you can use it only with an arduino that emulate the gps board on the rental firmware.
lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton

By Risitas98
Posts LikeBB LikeBB
#22797
mrracerhacker wrote:
Sun Aug 16, 2020 6:25 pm
Risitas98 wrote:
Fri Aug 14, 2020 5:27 pm
Aquaman wrote:
Thu Jun 25, 2020 12:49 pm
I have flashed BLE/DASH to 1.1.0_FULL

Could connect without IOT-BOX but it didn't recognize anything.
When connecting with IOT-box in parallel, it didn't recognize the model but told me:
DRV 3.3.7
BMS 3.5.6



Where did you connect TTL-serial, did you hook it up in parallel with IOT-BOX?
In what order do you flash, DRV(ESC) and BMS?
I just get connection timed out if I try to flash any of the DRV(ESC) fw, And write length out of range if I try to flash the BMS To view images REGISTER or LOGIN for full access.


Any tips, Please?
There is a special key to unlock uart flashing on snsc 2.3
Idk how to find it but without that you can use it only with an arduino that emulate the gps board on the rental firmware.
lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton
OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?

By mrracerhacker
Posts
#22805
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am
mrracerhacker wrote:
Sun Aug 16, 2020 6:25 pm
Risitas98 wrote:
Fri Aug 14, 2020 5:27 pm

There is a special key to unlock uart flashing on snsc 2.3
Idk how to find it but without that you can use it only with an arduino that emulate the gps board on the rental firmware.
lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton
OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
To view images REGISTER or LOGIN for full access.
not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to

By Risitas98
Posts LikeBB LikeBB
#22815
mrracerhacker wrote:
Mon Aug 17, 2020 12:01 pm
Risitas98 wrote:
Mon Aug 17, 2020 7:51 am
mrracerhacker wrote:
Sun Aug 16, 2020 6:25 pm


lol no special key for flashing the snsc 2,3 flash the battery through iap, then do the esc with st link then do the dash or change it and drive away, just read up more and stop spreading false informaton
OK but some ppl said that bcz voi patched their motherboard bcz it was too easy to hack. So can you show the pins for the st link pls?
To view images REGISTER or LOGIN for full access.
not my image but its there, can help you more on discord if you want my name there is mrracerhacker, but its the same as ninebot max g30 just follow that guide, can even show pics of my converted ones if you want to
Thx can you give me your discord ID (with the 4 numbers that you forgot to add here)? I will flash my scooter 8 days later.


By Evren Y
Posts
#22823
Daif21 wrote:
Wed Aug 05, 2020 8:25 pm
To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.



The snsc 2.3 it has more similarities with esx than g30 max
The motor is a 350w aka gen2 with a drum brake.
The battery gets charged via the main board like the esx in the middle tube, where the g30 max has its own charging board and sits on the side of the battery.
The control board has also been placed in the middle tube and it looks a lot like the esx
I have tried to connect an esx dashboard but it shows error 10.
My best guess is that the wiring that connects to the dashboard is different.
Iam ordering an original g30 dashboard and will try to connect to it via Bluetooth.
I have also tried to bypass the bms but no luck either.
How can i remove that plate? I want to disconnect battery plug.




Torrents: Download IObit driver crack download […]

Torrents: Download Download [18+] Dirty Love (20[…]

Torrents: Watch Naomi Dee</span> Priscil[…]

Bas Rutten,

Torrents: Stream serial number vuescan 9 x32 L[…]