- Sat Jul 04, 2020 10:41 am
#22071
Once you have flashed the es4 dashboard with ble555 like in the old days
The next step is just to plug it to the max and then flash everything via esdowng right.
The files needed are the max bms and drv ? Or it's a 2.3 bms and firmware ?
then we can just plug the old 2.3 dash ? ☺
Thanks for the help !
Hello I just have a few questions.Aquaman wrote: ↑Tue Jun 16, 2020 9:48 amGreat picthisisstan85 wrote: ↑Tue Jun 16, 2020 5:43 amIt has its own connection on the esc, not connected to anything else
But the white "thing" is not in the right position right? It looks like it blocks one of the skrewholes? Is it mirrored both on X and Y axis?
I can't get a real grasp of how the lock mechanics work yet, how the electronic actuator releases the latch.
Third time's the charm.What color is the wires going to the lock and where is it hooked up to the EMC/BLDCC?
Maybe you didn't catch that, was a lot of questions.
Is it here? Am I right about the connectors? And what's the others connected to?
Haven't got the hatch open yet so I can't follow the wires...
How can I Flash the scooter ?
Is it Easiest with:
OrST-Link-route:
ST-Link (or NXP nRF- dev-board, I flashed ES4 dash with back in the day )
Then I Flashed BLE555 to dashboard (with dev board) first, then flashed everything (ESC, internal/external BMS) via ESDownG
IAP Ninebot route
Possible just with computer, usb-TTL and the IAP-software?
Would this thing work, is the scooter 5v-tolerable?
https://www.instructables.com/id/USB-to ... r-ESP8266/
Can you manage to just flash just dash with IAP?( I know BMS recommended.)
How do you flash ESC with IAP, can't seem to find that in any guide...
Once you have flashed the es4 dashboard with ble555 like in the old days
The next step is just to plug it to the max and then flash everything via esdowng right.
The files needed are the max bms and drv ? Or it's a 2.3 bms and firmware ?
then we can just plug the old 2.3 dash ? ☺
Thanks for the help !