An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
By BadAndy
Posts
#19751
I just finished flashing Spin dash but have not flashed the controller yet. Is it normal for the dash to not show proper battery level and not power off until the controller is properly flashed?

User avatar
By Sc00tr
Posts LikeBB LikeBB Avatar
#19759
BadAndy wrote:
Wed Feb 19, 2020 4:32 pm
I just finished flashing Spin dash but have not flashed the controller yet. Is it normal for the dash to not show proper battery level and not power off until the controller is properly flashed?
Yes, sometimes it will do that.

User avatar
By UnicycleSanta
Posts LikeBB Avatar
#19762
BadAndy wrote:
Wed Feb 19, 2020 4:32 pm
I just finished flashing Spin dash but have not flashed the controller yet. Is it normal for the dash to not show proper battery level and not power off until the controller is properly flashed?
How are you planning to flash the controller? Do you have specific tutorial you are going to follow? Thats the part im getting stuck on.

By BadAndy
Posts
#19765
I'm researching several posts and videos, most have been listed here or are linked to them. I had to order another st link as it took at zap from another projects capacitor. I should be back in business Sunday when it arrives. I will let you know how it goes.

https://www.scooterhacking.org/forum/vi ... f=26&t=213

Below is an older Ninebot controller how to video but should still be some what relevent.

https://www.scooterhacking.org/forum/vi ... f=26&t=213

By BadAndy
Posts
#19766
Corrected Video how to link.



You will have to hook to the newer controller correctly and use the correct dump files.

User avatar
By UnicycleSanta
Posts LikeBB Avatar
#19767
Ordered dash replacement from AliExpress. In the meantime I gotta figure out how to correctly wire the controller to the dash connector to avoid frying the dash and to have proper functionality. Also gotta figure out how to flash the BMS... I haven't seen too much on that one.

By CapnBio
Posts
#19780
I have a max from spin, I'm waiting on a replacement cable, I already ordered an esc and dash, but I'm waiting on the cable to drive, when I got the dash and esc and connected it, I got an error 16 every time I turned it on, but I was able to connect to it no problem with Bluetooth and it said it was an accelerator problem. I'm waiting on the cable to come in so I can try again. I'll keep you guys posted.

Reason why I ordered a new esc and dash is because I fried them both by doing something stupid. No need to explain with pliers in my hands and keeping certain things connected To view images REGISTER or LOGIN for full access.

User avatar
By UnicycleSanta
Posts LikeBB Avatar
#19820
Figured out how to flash the BMS, proper wiring, flashing the dash, and flashing the ESC. Now to do all of these things and report back. Once I get this running I will make an easy to follow comprehensive guide on how to convert Lyft scooters.
James007, lurkinglime, Scarykid and 3 others liked this

By landshark
Posts
#19824
Can the stock throttle be used by a generic motor controller?

I just want to know if I have to order a throttle as well. When I get it running, I promise to come back with some top speed GPS readings To view images REGISTER or LOGIN for full access.

User avatar
By Sc00tr
Posts LikeBB LikeBB Avatar
#19837
Stock throttle works with clone controllers.
landshark wrote:
Tue Feb 25, 2020 2:21 am
Can the stock throttle be used by a generic motor controller?

I just want to know if I have to order a throttle as well. When I get it running, I promise to come back with some top speed GPS readings To view images REGISTER or LOGIN for full access.

  • 1
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Where to start?

What's the best skill to have when getting into ha[…]

Tier ES 400 Charger

Search 48v 8mm charger

Update: This only works with STM32F0 Series. […]

NEW BIRD ONE - MODEL 590

Does anyone know where to get a replacement headli[…]