An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Discuss the Segway Ninebot ES and Ninebot Max Kick Scooter in this Forum. Topics include the Segway-Ninebot app, hardware, street riding, etc.
By scoterter
#18948
hello, i have for project to recycle a voi escooter (ninebot max G30) can i do it just with the control pannel and the dashboard ?

[https://www.ebay.com/itm/New-Original-N ... 9gn3nGsK2Q]
Control board

[https://www.ebay.com/itm/Original-Nineb ... c91a729151]
Dashboard

[https://www.ebay.com/itm/Ninebot-Max-Se ... AOSwQLZeBX~-]
Foldable pole

I really want a G30 escooter but I do not have enough money
Thanks for ur comments :D
By bilzbub
#18955
Man, wish we had voice here!! I love the es style drive shaft.. gives me all kinds of customization ideas!

Only ones way to find out!! Start with the dash and see how that goes.. the esc may be flashable
By Caliguy661
#18958
Kiki626 wrote:
Wed Jan 08, 2020 12:06 am
You need to take the lyft battery apart and flash the bms hex file available on scooterhacking.coms discord server. I’d send this to you but I can’t attach things here.

There’s software on the lyfts that prevents it from working with oem parts so u have to replace the bms software first otherwise it will it out. Also you flash it using your stLink but with the software STVP because it’s a different chip
How do you flash the bms? i have a spin and id like to charge it to 100% but right now it limits to 80%. ive taken apart the battery and connected my st link and ive found 4 bms134 files but im not sure what to do next.
By Kiki626
#19061
You need a program called STVP and then a fulldump of the bms file ( it will be a .hex file or a .bin file)
Write to the PROGRAM MEMORY only not the Data Memory.
By Kiki626
#19190
scoterter wrote:
Sat Jan 11, 2020 2:49 pm
hello, i have for project to recycle a voi escooter (ninebot max G30) can i do it just with the control pannel and the dashboard ?

[https://www.ebay.com/itm/New-Original-N ... 9gn3nGsK2Q]
Control board

[https://www.ebay.com/itm/Original-Nineb ... c91a729151]
Dashboard

[https://www.ebay.com/itm/Ninebot-Max-Se ... AOSwQLZeBX~-]
Foldable pole

I really want a G30 escooter but I do not have enough money
Thanks for ur comments :D
Take a picture of what the dashboard area looks like, you might not even need to buy anything but that folding pole nibba
By A74
#19639
Rosario wrote:
Tue Nov 12, 2019 7:36 pm
Guys I f***ed up! I installed the display of an ES4 to unlock the speed but by mistake I updated the firmware when it was connected. Now it doesn't turn on anymore or better I have to keep the key pressed otherwise it turns off and an error appears 19.
I will probably have overwritten something on the software level. How can I restore everything?
Is there a hard reset or a way to load new firmware?
Thanks :oops:
Same problem here. Won`t stay on keeps switching off and error code 19 when I keep on pressing the power button. An solution?
User avatar
By Lewy10
#19657
A74 wrote:
Tue Feb 11, 2020 2:38 pm
Rosario wrote:
Tue Nov 12, 2019 7:36 pm
Guys I f***ed up! I installed the display of an ES4 to unlock the speed but by mistake I updated the firmware when it was connected. Now it doesn't turn on anymore or better I have to keep the key pressed otherwise it turns off and an error appears 19.
I will probably have overwritten something on the software level. How can I restore everything?
Is there a hard reset or a way to load new firmware?
Thanks :oops:
Same problem here. Won`t stay on keeps switching off and error code 19 when I keep on pressing the power button. An solution?
I made the same mistake myself. If theirs anybody could you post some pictures on how to flash BMS and/or any other ways to fix ERROR 19. :)
User avatar
By UnicycleSanta
#19706
Just spent a fat minute reading the thread. I used to convert Bird Zeros and ES4's before the Max came out so I already have a good understanding of how all this works.

From what I have read in the thread up until this point:
- Lyft scooters need the wiring reverted to stock
-Lyft scooters need the controller to be flashed (?)
- Lyft scooters need the BMS flashed
- Both Lyft and Spin scooters need a stock dash (spin comes with them) and it needs to be flashed

So essentially, if you get a Lyft all you need to do is rewire, flash the controller/bms/dash and its good to go. If you have a spin, flash the dash and its ready to go.

All I need to figure out is how to flash the Dash/Controller/BMS. I am trying to register over at scooterhacking.org but the things broken.
By Sc00tr
#19728
UnicycleSanta wrote:
Sun Feb 16, 2020 1:55 pm
Just spent a fat minute reading the thread. I used to convert Bird Zeros and ES4's before the Max came out so I already have a good understanding of how all this works.

From what I have read in the thread up until this point:
- Lyft scooters need the wiring reverted to stock
-Lyft scooters need the controller to be flashed (?)
- Lyft scooters need the BMS flashed
- Both Lyft and Spin scooters need a stock dash (spin comes with them) and it needs to be flashed

So essentially, if you get a Lyft all you need to do is rewire, flash the controller/bms/dash and its good to go. If you have a spin, flash the dash and its ready to go.

All I need to figure out is how to flash the Dash/Controller/BMS. I am trying to register over at scooterhacking.org but the things broken.
What is “the thing” that is broken and how is it broken?
By landshark
#19744
I'm looking to convert my Lyft scooter pretty soon. Can you guys help me with a couple questions?

Will any generic motor controller work with the stock Lyft throttle assembly or do I need to buy a new throttle? The link to the generic motor controller is below but not sure if it's gonna show up.
https://www.amazon.com/Alomejor-Brushle ... th=1&psc=1

The battery BMS/battery combo seems to charge just fine on its own when I plug it in. For connecting it the motor controller, I plan to bypass the negative BMS wire output and hook it directly to the negative battery wire.

Does all the above sound like it would work?
  • 1
  • 20
  • 21
  • 22
  • 23
  • 24
  • 28

Any one got any info on beryl bikes I seen a few i[…]

Hej Guys got my hands on this double battery pac[…]

As this was a rental version whos overstock was ev[…]

This last transistor needs to be soldered. https:[…]