An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Help, tips, technique, and frequently asked questions.

User avatar
By onoff
Posts Avatar
#15924
hello ,

you maybe have to disasemble the motor of the frame and you have to open the motor in two part to have access to the wires , then you have to use heat shrink on every wires one by one and then heat shrink over all together , or other solution , as you have to pass thought the nut with you wires it mmaybe too ticker if you use heat shrink , in this case you can change all the connection wire

By hodrodbob
Posts
#15978
I'd suggest based off the damage, you may have to open the motor and wire new cabling in directly. I would do that based off the damage

Any input is appreciated, and as you said hopef[…]

Stm32 (ESC) and stm8 (display) And there is nrf […]

Cheap Ninebot ES4 Legit or not?

Hello, Well I think that you will likely encounte[…]

not sure how to answer your question, sorry - but […]