m365 motor brake doesn't work

An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

m365 motor brake doesn't work#15713

By jdk - Thu Sep 19, 2019 4:31 am

- Thu Sep 19, 2019 4:31 am #15713

My m365 software is 1.4.2 and I flashed the firmware with these settings:
Maximum speed: 35km/h
Motor start speed: 2km/h
Motor power constant: 46000 (default is 51575 Lower = More power)

Yesterday I found that front motor brake doesn't work when the scooter is ON. I tried to flash back the default settings but no luck. Any ideas?

Re: m365 motor brake doesn't work#15746

By Robert Brown - Fri Sep 20, 2019 9:12 am

- Fri Sep 20, 2019 9:12 am #15746

jdk wrote: ↑
Thu Sep 19, 2019 4:31 am
My m365 software is 1.4.2 and I flashed the firmware with these settings:
Maximum speed: 35km/h
Motor start speed: 2km/h
Motor power constant: 46000 (default is 51575 Lower = More power)

Yesterday I found that front motor brake doesn't work when the scooter is ON. I tried to flash back the default settings but no luck. Any ideas?

The way I see it you either blew up your BMS, controller or dashboard (it sounds like you probably blew a fuse on one of the boards) Or it’s a firmware issue. If it’s a firmware issue you could buy a ST -link and try that but honestly if you flashed everything back to stock and it’s not working it’s almost certainly one of the boards.