An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
If you want to use your existing lights, you'll need to see if your controller has an output for lighting and what voltage it supplies. For example, some are putting out the same voltage as it does for the motor...so 36v for both. In that case you'd probably have to wire in a buck converter to reduce the voltage to the 5v-12v you likely require.
I was able to solve the 3 short 1 long red blink b[…]
AWESOME!! Thanks for taking the time effort to car[…]
Prosím mám problém lime S[…]
Those are the same dashboards in the Lime SJ2.5 a[…]