- Fri Aug 09, 2019 11:21 am
#13848
So I have a couple more questions, the high brake, I've read articles on what it does, so it's basically the breaking system the controller uses from the battery to put it to a halt, like the original es4 scooters, would I need to connect this to the bird zero in order for it to run properly, I dont have a low brake on this controller. Also what is the self learning wires kn the controller help you connect the phase wires correctly in order to make the scooter run smoothly from the stop position, then you unplug the self learning wires so that it remembers the current connection setup, in other words help you connect the right wires in the fewest combinations of the Phase wires, also...
With my throttle, it has the ignition key, is there a specific way to wire these wires to make the key ignition work properly,as in if I turn the key to off position the scooter should turn off and not work to make sure it's not left on? I appreciate the feedback, you guys have helped so much
With my throttle, it has the ignition key, is there a specific way to wire these wires to make the key ignition work properly,as in if I turn the key to off position the scooter should turn off and not work to make sure it's not left on? I appreciate the feedback, you guys have helped so much