An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
#12599
Have a question.

I have two scooters. One with a display that does not display anything (but I can connect via bluetooth and use the segway app, change the colors of the led etc.) to the other the display turns on and then goes out.
I did the following, I changed the handlebars between them and I can connect every time through the bluetooth and control the speed lamp etc.
As a solution, I bought (and am waiting) for a full handlebars in there. Because I'm looking for the information on the display.

The questions would be:

1 - I will be able to use the handlebar display right?
2 - My central card is not locked, right?


Sorry, I'm anxious, that's why the questions are soooo much lost!
#12639
Hello,I found dumped in a garbage container Ninibot KickScooter ES1.I pressed the power-on display and, to my surprise, was working,but does not start nor does Bluetooth connection.just by turning the front wheel sounds beep beep.tell me what I need to change so I can use it-motherboard, display and can I remove bluetooth connection too,and just to go without the need a bluetooth connection!
#12863
Hi, i just order same control unit. Can i ask you for some wiring diagram ? Wich wires connect together. And can i use original throttle pro not? Thanx a lot. Tomas
carbacca wrote:
Sat Dec 15, 2018 7:28 pm
images here - excuse the camouflage. am also waiting for another enclosure box to tidy it up a bit
https://imgur.com/a/j4wh2HF

the two parts i used - box and wiring instructions all chinese - beware if you dont read chinese....

https://www.aliexpress.com/item/Finger- ... 1a2eyCz3Pd

https://www.aliexpress.com/item/36V-48V ... 8f12Gi1fLm
#12928
no because i didnt write anything down. i didnt use the original throttle so i have no idea what the pin outs are like

you can figure it out quite easily by elimination and intelligent guessing
Hellrider87 wrote:
Mon Jul 15, 2019 4:08 pm
Hi, i just order same control unit. Can i ask you for some wiring diagram ? Wich wires connect together. And can i use original throttle pro not? Thanx a lot. Tomas
carbacca wrote:
Sat Dec 15, 2018 7:28 pm
images here - excuse the camouflage. am also waiting for another enclosure box to tidy it up a bit
https://imgur.com/a/j4wh2HF

the two parts i used - box and wiring instructions all chinese - beware if you dont read chinese....

https://www.aliexpress.com/item/Finger- ... 1a2eyCz3Pd

https://www.aliexpress.com/item/36V-48V ... 8f12Gi1fLm
User avatar
By Tai The Guy
#12968
Any1 know where exactly the blue & yellow throttle wires go in this setup? I know they're coming from the red on/off switch.
Seen a few ppl do this, but no one seems to have posted a clear answer.
Image
Image
#12984
I have been reading through this thread for quite a while now, does this still work on the latest scooters Lime has been putting out? Also, Bird has recently deployed a new scooter not based off the M365. Anyone know if the internals use the same boards as the M365 or Ninebot?
  • 1
  • 93
  • 94
  • 95
  • 96
  • 97
  • 136

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]