An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
#11758
Its not backwards. so you took it apart for no reason
To view images REGISTER or LOGIN for full access.

jforum wrote:
Fri Jun 14, 2019 2:48 am
Ronan wrote:
Thu Jun 13, 2019 11:32 pm
the wheel isnt backwards. what are you trying to do exactly. your post makes no sense
To view images REGISTER or LOGIN for full access.
Yes belive me, the wheel is backwards. The image doesn´t show exactly that fact because I took it off. But look at this:

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.


Do you see now that the the whell is backwards? I try to rotate the all part but its impossible, i think that inside the tube (from the top) you have an retaining washer but seems that only with a special tool we can take it off...
jforum liked this



#11769
Theres nothing wrong with it. It looks exactly like the one I posted

To view images REGISTER or LOGIN for full access.

yeswhat478 wrote:
Fri Jun 14, 2019 5:15 am
Its bent... more bent than a roundabout. Someone probably stacked it into a curb and is still recovering in hospital.

It looks like the mudguard hits the deck. Definitely not right!

I WOULD NOT ride that.
jforum liked this



#11812
hello pleope, i just wanted to share with you my experiences with a ninebot es1 scooter that i bought on internet, it was very cheap and i supose that may be is bad and i will have to fix it, but the reality was thar it was a scooter fom a retail company GRIN, after try to charge it up, it di not charge and i checked the battery and it shwed a red led blincking.

so i opened the bateerey and checked the tension in the cells an it was very low, 2.1V, so i charge up each cell to 3.4v but it still keep showing the red led blincking, so i think thar the bms is bad and so i will need a new battery, and a dashboar and a control boad in orther to keep it original what is a lot of money for mi. what i am going to do is install a new BMS and a aliexpress control for BLDC motors.

here are some pics of what i hace now and i will upload the procedure as soon as the parts arrive fron china.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

To view images REGISTER or LOGIN for full access.

If you have questions this is my e-mail dryber@hotmail.com


#11856
Hi

Several people on this topic say that it is not necessary to change the controller scooters ninebot (Tier, Voi, Wind, etc ...), so I listened to them. I bought an ST-Link, I flashed the dashboard with the default OS of ninebot and then I reassembled everything. However after having all reassembled, the dashboard turns on but does not display the battery bar, the taillights flash constantly, can not accelerate and when I connect to the Segway application I have an error concerning the drums.
Anyone know if I did something wrong?

Thank you in advance.

#11900
hi, i have a ninebot es2.
The central plate and the control plate have changed.
The scanner is turned on and the application is unlocked.
The problem I have is that the motor does not force and the motor does not work.
Anyone knows how to solve this? the engine does not turn when tightening and accelerating
mwrc liked this

  • 1
  • 87
  • 88
  • 89
  • 90
  • 91
  • 122
Codigo Pintura

Hola chicos, alguien sabría decirme que pin[…]

Tier ES 400 Charger

Searched for 48V charger on Amazon? :roll:

I already opened a lot of them but you won't like […]

This week I might be able to sacrifice some time i[…]