Page 5 of 80

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 3:37 am
by antonio
Hello all

Basti, THX for new release!!!!

Only 1 question, for witch model is designed? ES100, ES200.......

Thx for your answer

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 7:08 am
by Marius Petz
Unfortunately all released methods doesn't work on a VOI ES100D. Do somebody have a solution for this scooter?

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 11:10 am
by SJAAK
Anyone tried this on the DOTT 1?
With the motor and a manual brake on the back wheel. supposedly it's an Kuickwheel FS50
Image
gps/security board

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 3:41 pm
by Rick Sanchez
@basti256 did you find a solution to the "deepsleep" problem? At the moment I have the same problem with one of my "Mortys" 8-) It switched off the power to the red and black cable and seems to be deaf to signals. If not I gonna try my opened reengineering controller in the next few days, but i have to pack a few things because I got another job offer in a foreign country and sh*t will hit the fan if I'm not there in time.......why do ppl like us always have so less time left doing useful things :cry:

Edit: Sleepless due to unsolved problems i found my way back to the workbench, it was my BMS going into safety disconnect :lol: Now going to another test ride enjoying the fresh winter air and fetching a recompense beer from the gas station :D WUBBA LUBBA DUB DUB

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 3:55 pm
by bigredrobot
Here is a download link for XLoader if anyone needs it. Its from Hobbytronics so proceed with caution:

http://www.hobbytronics.co.uk/download/XLoader.zip

And found a hex uploader for Arduino for Mac

http://paulkaplan.me/HexUploader/

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 5:28 pm
by electricool
hello everyone and thank you for sharing your research, I tried this method with a bird zero, after wired well and well flashed arduino uno, I transferred the .hex file but no reaction on this model, the led arduino flash but after pressing the button for one second, no sound comes out and no reaction at the counter, donations do not work for the ES100 (France)
thank you for your work and your sharing
PS: thank you bigredrobot for the link and thank you to Basti256 for leading the way
Image
Image

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 8:00 pm
by electricool
antonio wrote:
Wed Dec 04, 2019 3:37 am
Hello all

Basti, THX for new release!!!!

Only 1 question, for witch model is designed? ES100, ES200.......

Thx for your answer
ES100 BIRD ZERO

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Wed Dec 04, 2019 8:38 pm
by Rick Sanchez
Is it just me beeing morty or does anyone else have problems getting rev 0.2 to work also? I tried to flash the machine code Hex several times changing between my source, rev0.1 and rev0.2 but the latest one doesnt boot the scooter. I checked the output with a logicanalyzer but it is just putting out empty 00 hex bytes and repeating 6 of them over and over again. My scribt and rev0.1 do still work on my nano :shock: rev0.2 doesn't tickle the speaker also, it is just switching between TX line state "continious high" and repeating 6 "00" Hex bytes by pressing the button. @basti256 any Ideas?

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Thu Dec 05, 2019 12:44 am
by UgloBuglo
electricool wrote:
Wed Dec 04, 2019 8:00 pm
ES100 BIRD ZERO
That's not what basti uses - he has a Tier!
I think it comes with a ES-200G ESC, since that's what he tested his code on.

Re: [TUT] How to unlock your Electisan Tier or Dott scooter *Alpha*

Posted: Thu Dec 05, 2019 1:58 am
by bigredrobot
Rick Sanchez wrote:
Wed Dec 04, 2019 3:41 pm
@basti256 ... Edit: Sleepless due to unsolved problems i found my way back to the workbench, it was my BMS going into safety disconnect :lol: Now going to another test ride enjoying the fresh winter air and fetching a recompense beer from the gas station :D WUBBA LUBBA DUB DUB
You keep the Rock & Morty coming. Dont stop, Its great! Lets stick it to the council of Ricks by showing them they can’t charge us for scooters. I am rewatching all seasons along with the new s4 episodes