Page 1 of 1

Does anybody know how many watts are in a bird one motor

Posted: Fri May 17, 2019 5:40 pm
by excess0224
I’m looking to convert a bird one and I want to know how powerful of controller to replace I also plugged in AM365 And got it to turn on but it won’t drive

Re: Does anybody know how many watts are in a bird one motor

Posted: Tue Jul 09, 2019 12:16 pm
by jaysonjehsen
I would also like to know!

Re: Does anybody know how many watts are in a bird one motor

Posted: Wed Jul 10, 2019 1:12 pm
by jaysonjehsen
I plugged in the bird one motor to an M365 motherboard, got the hall/phase wire pairs right so it would rotate, but then when I test-rode it, the motherboard overheated WAY too fast and melted several of the copper traces on the back of the board, similar to several other posts on this forum of bird zero motors with the M365 mobo.So unless someone has something to say to counter this statement, I don't think it's possible to hook up a bird one motor to the M365 for now without limiting the power output or you'll need some kind of cooling to keep the motherboard working properly.

Re: Does anybody know how many watts are in a bird one motor

Posted: Sun Aug 25, 2019 5:03 pm
by Butch456
i have done couple no meed to replace just put wheel on add battery for more distance and it works

Re: Does anybody know how many watts are in a bird one motor

Posted: Sun Aug 25, 2019 5:06 pm
by Butch456
300 and no burned wires or boards. used regular firmware. We have don three all worked

sure wiring correct pretty simple

Re: Does anybody know how many watts are in a bird one motor

Posted: Sun Aug 25, 2019 5:09 pm
by Butch456
i also did it with es4 wheel and worked great. the wiring olors were different took little longer

Re: Does anybody know how many watts are in a bird one motor

Posted: Thu Sep 12, 2019 8:44 am
by ColorMeCujo
Butch456 wrote:
Sun Aug 25, 2019 5:09 pm
i also did it with es4 wheel and worked great. the wiring olors were different took little longer
Do you happen to have a wiring diagram for using a One wheel on the ES4?

(Or even the M365)

I'm having some trouble with getting it all to be friendly with each other.