- Mon May 06, 2024 9:01 am
#58395
Hi, i got old rental scooter and i ordered this controller: https://vi.aliexpress.com/item/1005005928202257.html?
I connected all wires right and speed doesnt show up, only 00 when i ride. Kick up start mode doesnt working too, only autostart mode. I meassure hall sensor output and everything seems to be ok.
RED - 4.5V, BLACK GND, Green+Blue+Yellow when stop, then 0, when ride then 2.5V. I measure them into controller box board directly.
In app is autotest feature and hall is after test ok. Wheel diameter cannot be changed 8,5inch there.
Voltage 36V right selected.
Where can i search for problem? Thank you.
I connected all wires right and speed doesnt show up, only 00 when i ride. Kick up start mode doesnt working too, only autostart mode. I meassure hall sensor output and everything seems to be ok.
RED - 4.5V, BLACK GND, Green+Blue+Yellow when stop, then 0, when ride then 2.5V. I measure them into controller box board directly.
In app is autotest feature and hall is after test ok. Wheel diameter cannot be changed 8,5inch there.
Voltage 36V right selected.
Where can i search for problem? Thank you.
- By alphayop