An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Get moving and see the electric motor and wheel discussions in this category.


#12648
I plugged in the bird one motor to an M365 motherboard, got the hall/phase wire pairs right so it would rotate, but then when I test-rode it, the motherboard overheated WAY too fast and melted several of the copper traces on the back of the board, similar to several other posts on this forum of bird zero motors with the M365 mobo.So unless someone has something to say to counter this statement, I don't think it's possible to hook up a bird one motor to the M365 for now without limiting the power output or you'll need some kind of cooling to keep the motherboard working properly.





#53004
3000w

I use the bird one motor (590) with black paint side cover(from inside) and with ferro fluid.

I have a 20s6p 18650 build from 120 Samsung MH1 cells

Controller : Grin Phaserunner v2

Bms 80A Ant Bms


Scooter make 70km/h
3000w

In summer the motor is hot but I ride it 2 years and the coils look like new

hi jeppo17 and Milo, very interessting project -[…]

Hello, did you find the 3D print?

Hi everyone I'm new to working with Arduino. I tri[…]