Page 1 of 1

4pin circuit board to 5 pin? Help

Posted: Sun Jan 12, 2020 12:24 am
by dougxwylde
Got a new dashboard and the circuit board cable is 5 pin. Scooter to mother board is 4 pin? Any ideas

Re: 4pin circuit board to 5 pin? Help

Posted: Mon Jan 13, 2020 11:23 pm
by 365GUY
Yea you need to buy a new retail 4pin cable.
No other option that I can think of

Re: 4pin circuit board to 5 pin? Help

Posted: Mon Jan 13, 2020 11:26 pm
by dougxwylde
One last question. The scooter has lost a lot of power. It’s able to charge full. I get on and start riding and scooter shuts off. Battery depleted within seconds. Turn the scooter back on and it’s showing full battery? I’ve taken my voltmeter to the main powercable and it’s showing 37v

Re: 4pin circuit board to 5 pin? Help

Posted: Tue Jan 14, 2020 12:24 am
by Sc00tr
No other option... besides rewiring the 5 pin and moving the connector?
365GUY wrote:
Mon Jan 13, 2020 11:23 pm
Yea you need to buy a new retail 4pin cable.
No other option that I can think of

Re: 4pin circuit board to 5 pin? Help

Posted: Wed Jan 15, 2020 5:06 am
by 365GUY
Sounds like the BMS is killing power to the controller. Maybe need to flash the BMS if your running rental firmware.

Re: 4pin circuit board to 5 pin? Help

Posted: Wed Jan 15, 2020 4:24 pm
by Sc00tr
What type of scooter is it? As stated above it does sound like the Lyft bms.

Re: 4pin circuit board to 5 pin? Help

Posted: Wed Jan 15, 2020 10:54 pm
by moisesloza74
hey guys . I just bought a lyft scooter from the inpound and it's made by segway but I removed the gps module and i seem to have a notch for a xiaomi dash board. I bought the board tryed to install it but the wiring from the scooter has a 5 pin small green plug and the board has a 4 pin plug. Any way on how to make this work ? iv'e been looking at the post and and im fairly new to the scooters and all so please have a little patience with me and please walk me thru this and I will really apreciate it . Thanks

Re: 4pin circuit board to 5 pin? Help

Posted: Fri Jan 17, 2020 5:29 pm
by Sc00tr
Sounds like you bought a ninebot max...

Can you post a picture so we can better help you?
moisesloza74 wrote:
Wed Jan 15, 2020 10:54 pm
hey guys . I just bought a lyft scooter from the inpound and it's made by segway but I removed the gps module and i seem to have a notch for a xiaomi dash board. I bought the board tryed to install it but the wiring from the scooter has a 5 pin small green plug and the board has a 4 pin plug. Any way on how to make this work ? iv'e been looking at the post and and im fairly new to the scooters and all so please have a little patience with me and please walk me thru this and I will really apreciate it . Thanks

Re: 4pin circuit board to 5 pin? Help

Posted: Fri Jan 17, 2020 8:46 pm
by Kiki626
whatever you do dont plug in the green cable to the blue one you'll fry the dashboard. Sounds like you have a max but pls post pics

Re: 4pin circuit board to 5 pin? Help

Posted: Tue Jun 21, 2022 10:58 am
by Electriqscooter1208
Scooter has 5pin connector but my newly bought dashboard have 4pin?? How do i connect?