An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.
Hi.LAskooter213 wrote: ↑Sat Jun 01, 2019 4:35 pmMost of the quality lighting your going youre find out there is going to be designed around 12v systems since thats what cars and motorcycles use. Remember that instead of messing around with stepping voltage down to 12v from your original battery pack, you can always just add an extra battery pack of 3 or 4 18650 batteries in series and use this as your power source for lights/horn etc. I found that the Bird brain gps box that many scooters have mounted on top of the stem worked real well for this purpose. I glued two of those boxes together on my red scooter to make a big 12v battery box for all my accessories. It worked out well for me, looks good, is super easy to add new 12v accessories, and I can replace the batteries when they get weak. Best of all, it doesnt draw power from my scooter battery and decrease my range. Or you could even stuff the batteries in the neck and just stack em on top of each other in a small tube or something. You can buy a pre-made battery holder or just solder wire to the batteries to make your pack. Just dont get em too hot if you solder. You need to work quick.
https://www.amazon.com/Battery-Holder-S ... way&sr=8-2
This is f**king magnific, i want this on my m365. I can carry a battery in the backpack, no problem. Drivers here in Romania/Bucharest want to kill us
Yeah I have ordered it from ebay. These were so good365GUY wrote: ↑Fri May 31, 2019 8:22 pmYou can get cheap light bars off amazon that have both close and far beams. I put a sh*t ton of lights on my Polaris Razor for when I go down to Mexico. I can light up the whole f**king city it’s so bright.
You could do like a 18” light rail down the front and the way they build them is the close beams are in the center and the flood are on both ends.
The new LED light bars are incredible. Would be 12v so you need to figure that one out.
Drill hole and solder jumper ? Do you mean solde[…]
Hi All, Just wondering If ya all got any teardown,[…]
Alright mate could you be abill to do that bypass […]
I got the battery out of the casings, and I didn't[…]