An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Brains of the e-scooter. Topics covering controllers, throttles, etc in this section.
#16035
If red (1) and yellow is your ignition harness, remove the jumper wire. Connect the blue wire to red (1) and yellow to yellow. When you turn your key/switch on the display should turn on. If the display is on with the key off, reverse your wires. Red to yellow, yellow to blue.
Just make sure red/yellow is for ignition.
#16051
323HW420 wrote:
Sun Sep 29, 2019 7:27 am
If red (1) and yellow is your ignition harness, remove the jumper wire. Connect the blue wire to red (1) and yellow to yellow. When you turn your key/switch on the display should turn on. If the display is on with the key off, reverse your wires. Red to yellow, yellow to blue.
Just make sure red/yellow is for ignition.
That's perfect, thank you. ;)
Blue on yellow (1) and yellow on red (1). :)
LIME 3.GEN PERSONAL.....

Hi alecxs, the main Version from Emile ist runni[…]

No they's no gps in the big , removable battery yo[…]

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]