Page 1 of 2

Zero turn key

Posted: Thu Jun 06, 2019 4:02 pm
by TJSplash
Has anyone thought about ditching the M365 circuit board and going with a turn key ignition instead? I have no idea if this would work, but it's something that kind of struck me and I've seen a lot of handlebar throttle systems with them built in online

Re: Zero turn key

Posted: Thu Jun 06, 2019 5:45 pm
by 365GUY
That’s what I’m doing..
it should be here tomorrow..
it’s just a throttle with a key switch.

All you need is the controller, on/off switch, throttle, motor and battery.

The throttle key switch is nice because it takes care of two requirements in one cheap package.
The one I ordered was only about 15$ from amazon prime.

Re: Zero turn key

Posted: Thu Jun 06, 2019 5:48 pm
by TJSplash
Any idea as to how to make the 1000w controller work? I followed LA's instructions, but I cant get the throttle to work right

Re: Zero turn key

Posted: Thu Jun 06, 2019 7:29 pm
by 365GUY
What are you having problems with exactly?

Re: Zero turn key

Posted: Thu Jun 06, 2019 7:36 pm
by TJSplash
I can get the wheel to spin when I'm setting the intelligence program, but I can't get the throttle or break to work

Re: Zero turn key

Posted: Fri Jun 07, 2019 12:13 am
by 365GUY
That’s the same problem I had, after beating my head against the wall for a few hours I finally opened up the controller to find the throttle wires not connected to the board.

Re: Zero turn key

Posted: Fri Jun 07, 2019 7:28 am
by TJSplash
So quick a quick solder job will fix that?

Re: Zero turn key

Posted: Fri Jun 07, 2019 9:55 am
by TJSplash
Image

Is this the one? 365GUY?

Re: Zero turn key

Posted: Fri Jun 07, 2019 2:42 pm
by 365GUY
No it wasn’t fixable as the board was kinda messed up where the wire should have gone. I returned it and bought a different brand. Should be here today.

Re: Zero turn key

Posted: Fri Jun 07, 2019 2:43 pm
by 365GUY
And yea the throttle I got was basically the same as that one but just black.