Scooter Talk

Hello Community,

Any idea if it's possible to wire this up or do I just need a new controller too? I have a replacement throttle/switch.
Also noticed some sort of service button attached to controller...does anyone know what it's for? I was hoping it was a brain jump but it didn't work. I've seen posts about people who make their own brain jump with a battery... please help if you have knowledge.

thanks,
SktrMcGvn

I have the same issue, but I can’t find any post or video to rewire it. Please let me know when you find out.

Thanks

I have a new controller arriving soon that will wire up to this new throttle....I was just wondering if someone knew how to turn on the digital unit with the existing hardware. I'll post pic when it runs.

Thats not the controller. Thats the GPS unit. Throw it away. The controller is in the transition from the deck to the neck

What are you guys trying to do here ? Get a bird zero to work with the existing hardware?

The original post , that is the Tracking unit they use to locate the scooter. I’m not sure where you got the scooter from but chances are the location is registered as it’s last known location.
Even if the battery was dead the small battery can send out location.

And to answer your question, no you can’t bird brain jump it. It only turns on via the bird app.
The button is just a reset

Will the ninebot brain work on the tank? I have one torn apart in my garage but cannot seem to find a compatible brain to make it work

Ok so when the new controller arrives....I'm holding that I can switch it out on the zero and simply run in up to the new throttle....who's got the accurate wiring schematics??? I guess I'll post it when it's done. Muahahahahahaha.

Sktrmkgvn wrote: ↑

Sat Jun 29, 2019 9:07 pm

Ok so when the new controller arrives....I'm holding that I can switch it out on the zero and simply run in up to the new throttle....who's got the accurate wiring schematics??? I guess I'll post it when it's done. Muahahahahahaha.

Here you go

xdencio wrote: ↑

Sun Jun 30, 2019 2:30 am

Sktrmkgvn wrote: ↑

Sat Jun 29, 2019 9:07 pm

Ok so when the new controller arrives....I'm holding that I can switch it out on the zero and simply run in up to the new throttle....who's got the accurate wiring schematics??? I guess I'll post it when it's done. Muahahahahahaha.

Here you go

Very good! But what am I looking at...I saw on your other post that you were gonna plug 10 connector into the 6 somehow? Do I even need the disabled gps anymore and does your lcd unit on top work just fine?!!!! youda man!!!!!!!!!!

So far i managed to get it charging, now it shows 99% charged on the battery on the dashboard. Bypassing the GPS is still in mapping/reverse engineering stage.