Page 2 of 3
Re: Tier 4.gen
Posted: Mon Nov 02, 2020 1:12 pm
by ray_t
The one I ripped it's battery from is a ES400B then. I'm just in the process of converting the battery to standard XT60 connectors.
Re: Tier 4.gen and tier
Posted: Mon Jun 21, 2021 7:14 am
by bagnare
hello it is easy to open just with a 5v or 12v battery or a 12v power supply then remove the carpet and remove the vices on your left there is a box detach the connectors separate the red and black wires connect them to the battery or to the 5v or 12v power supply and hoop the battery out and if you want to replace the battery, reverse the power supply
GPS Tracker?
Posted: Wed Jul 28, 2021 7:45 pm
by TheElevator
do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker?
Re: GPS Tracker?
Posted: Thu Jul 29, 2021 1:13 am
by bagnare
TheElevator wrote: ↑Wed Jul 28, 2021 7:45 pm
do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker?
bonjour no gps in battery solo bms thank
Re: GPS Tracker?
Posted: Thu Jul 29, 2021 9:35 am
by TheElevator
bagnare wrote: ↑Thu Jul 29, 2021 1:13 am
TheElevator wrote: ↑Wed Jul 28, 2021 7:45 pm
do you know if a GPS tracker is built into the battery? Or is only the black box built into the ES400B as a GPS tracker?
bonjour no gps in battery solo bms thank
Tanks!
I will have a look at a Tier Scooter at Home
How to take the scooter offline?
Posted: Tue Aug 03, 2021 9:15 pm
by TheElevator
Q&A:
Q: Does it make any alarm noises?
A: No
----------------
Step 1:
Unscrew the two Security Torx.
Step 2:
Unscrew the 8 Phillips screws.
Step 3:
Remove the additional battery and the cable to the controller (inside of the pole)
Step 4:
Remove the SIM card
Re: Tier 4.gen and tier
Posted: Sun Aug 22, 2021 8:35 pm
by TheElevator
bagnare wrote: ↑Mon Jun 21, 2021 7:14 am
hello it is easy to open just with a 5v or 12v battery or a 12v power supply then remove the carpet and remove the vices on your left there is a box detach the connectors separate the red and black wires connect them to the battery or to the 5v or 12v power supply and hoop the battery out and if you want to replace the battery, reverse the power supply
Thanks, it worked
How does the Qi wireless charging plate work?
Posted: Mon Aug 23, 2021 2:05 pm
by TheElevator
ES400B Batterypack explanation
Posted: Mon Aug 23, 2021 6:10 pm
by TheElevator
I measured the pinout for the battery pack and the battery tray.
On the left you can see the "Power Out Connector".
On the right you can see the "Charge Input".
The bottom of the battery can be seen in the middle.
Here is the battery tray:
This is how i bridged "P1+" and "P2+", so that the battery thinks it's in the tray.:
Charge Port Input:
Powerconnector Output:
Re: Tier 4.gen
Posted: Fri Aug 27, 2021 10:33 am
by mayaku