An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
#22876
So i converted a few lime s3 and used a controller that is 350watts. Everytime the throttle is pressed, either its bogs down once its around half way or sometime it makes the motor vibrates and makes the motor make that squeeling sound .

My question is is 350watts not enough or the lime throttle resistance doesn't match The controller?

Any response is appreciated.
#22891
Yep, because on the motor lime 3.0, there is no hall sensor but only 3 wire for power motor. To fix this problem, you need a 250W brushless who's working without hall sensor with low amperage.
Because actually, if you want to go full throttle with your 350W that you put in, you need to accelerate slowly. :D Try it !
Last edited by lexfire on Thu Aug 20, 2020 8:59 am, edited 1 time in total.

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]