- Tue Jan 14, 2020 1:02 am
#19036
not sure if im being help full here but with a simple search through the seagull via notepad these are what i found
//0xA6,0x12,0x02,0xA9,0x01,0xDD mph no throttle es200g this the command sent after 10 clicks of the button so im guessing its the speed unlock????
//0xA6,0x12,0x02,0x89,0x01,0x1C mph no throttle es200g
//0xA6,0x12,0x02,0x8D,0x01,0x27 mph no throttle es200g with light
//0xA6,0x12,0x02,0x89,0x01,0x1C mph no throttle es200g
//0xA6,0x12,0x02,0x90,0x01,0x42 scooter locked no response
//0xA6,0x12,0x02,0x91,0x01,0x86 kmh no throttle es200g
//0xA6,0x12,0x02,0x95,0x01,0xBD kmh no throttle es200g with light
//0xA6,0x12,0x02,0xF2,0x01,0x89 scooter locked s200g with flashing light
//0xA6,0x12,0x02,0x90,0x01,0xC8mph no throttle es200g with light
//0xA6,0x12,0x02,0x95,0xF5 scooter locked no responce
//TERMINAL
//A6 12 02 90 01 42
//A6 12 02 A9 01 DD
//A6 12 02 89 01 1C no light + keep aive
//A6 12 02 8D 01 27 light on
//A6 12 02 A9 01 DD no speed limit?
//0xA6, 0x12, 0x02, 0xA5, 0x01, 0x90 mh no throttle es200g with light
//0xA6, 0x12, 0x02, 0xF2, 0x01, 0x89, 0xA6, 0x12, 0x02, 0xF2, 0x01, 0x89, 0xA6, 0x12, 0x02, 0x90, 0x01, 0x42, 0xA6, 0x12, 0x02, 0x90, 0x01, 0x42 start up before pin
//
//0xA6,0x12,0x02,0x90,0x01,0xC8 scooter locked no responce
//0xA6,0x12,0x02,0xF2,0x8F
none were formated like this i did it for testing
hopfully this helps some one
Last edited by Buddasticks on Tue Jan 14, 2020 3:09 am, edited 1 time in total.