Page 6 of 7

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Thu May 07, 2020 3:50 am
by KillaH
feijocas wrote:
Wed Aug 28, 2019 12:04 am

Here you have :-)
Have a nice scooter!!.

Hi!

Are there the correct wires that you will hook up to the scooter?

Image

Also, the one with a White connection, with Red/White-Green/Black wires, is that the throttle from the stearing column?

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Thu May 07, 2020 9:27 am
by bilou
Hi,

yes it's correct. just be careful with throttle and break conncetion. You've just to follow this scheme
Image

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Sat Sep 19, 2020 11:32 am
by jforum
Hello, do you it it is possible to read the Hall Sensor signals with an arduino and calculate the speed?

My Motor controller dont have Display..

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Sat Oct 10, 2020 7:20 pm
by huh12312
So, the wiring diagrams on the tutorial were great but a little confusing. Which of the wiring that was numbered goes to the throttle? Or is it one of the connectors that just passes thru?

Thanks!

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Sun Oct 11, 2020 3:03 am
by jforum
huh12312 wrote:
Sat Oct 10, 2020 7:20 pm
So, the wiring diagrams on the tutorial were great but a little confusing. Which of the wiring that was numbered goes to the throttle? Or is it one of the connectors that just passes thru?

Thanks!
Hi, the connector \ three wires with the same color: Black (-), White (Signal) and Red (+).

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Tue Nov 03, 2020 6:34 pm
by Bug_meh
is not possible to adapt the ninebot segway controller and dashboard to the 2.5 lime version?

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Sat Mar 06, 2021 1:28 pm
by ccv15
where would you put a cilinder key lock? at the red cable of lcd or at battery red (positive) cable?

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Mon Mar 22, 2021 7:44 pm
by chr-benavides
So from what I understand any motor controller 350-500Ws 35v/48v 15-20amps and a lcd dislay is ideal

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Tue Apr 06, 2021 3:56 pm
by DabDabDAb
happydude wrote:
Fri Sep 20, 2019 11:28 am
Image

Can anyone tell me what are connectors number 2 and number 7 ??
I disassembled the whole scooter and I haven't figured it out!

Thanks
;)
To answer this question: 2)- back light/brake; 7 it was used in earlier models for programming i assume

Re: How to create your new Lime-S 2.5 scooter working at 40km/h speeds..

Posted: Wed Aug 04, 2021 3:43 am
by tommicek69
Please advice, I bought a LIME 2.5, bought the system from aliexpress and the unit has a brake connection 2 cables (white and black) I do not know how to connect the original magnetic sensor from the brake. The scooter only works when I release the throttle, it moves inertia without braking with the engine. Can anyone advise me?