An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By DabDabDAb
#52862
Hi all,

I have recently purchased from flebay a lime auction scooter. After reading here dumped the whole content of the front box and then all in the column.

Purchased this controller from china, as it is pretty small an by the dimensions it could be fitted into the pillar.
Image

While waiting for the shipment to arrive, i have gutted the scooter more:
First cut a 93mm long sraight to the back of the pillar.
Image

Then from the front ot the pillar, trought the hole where the cables go to the box i drilled holes in a line at the end of the cuts, then witha screwdriver i broke it out.

To accomodate the new controller further changes were needed:
Image
More pic of how:
Image

First “dry test” of how the controller fits in:
Image
Image
Looks very promising, in the meantime i was doing the paintwork on the chassis, when drying thinktanked over the parts.

Decided to save more space i opened the box and unsoldered all the not needed wires, and made some changes, there is no need of 36 to 5v stepdown because the box already has 5v section, re-wired the lamp here:
Image

It was tine to manage the box and the cables connected in the column and in the handlebar. Sad news i had to do more guttering:
Image
Image

And removed the lamp’s cross holder bar:
Image
Image

Outcome:
Image
Image

Well not yet finished, still more paintjobs and stickers coming on.
:mrgreen: :mrgreen:

As this was a rental version whos overstock was […]

Any one got any info on beryl bikes I seen a few[…]

LH/ TF-100 Style Display.

Hi I recently converted a Bird Zero to a personal […]

How do you operate dash without button? I have[…]