An Electric Scooter Community on a Mission to Stamp out Transportation Mediocrity.

Covers electric scooter models whether shared or for consumers.
By Gothicgeek502
#53713
If someone gets me the right pinout for the controller I have a downgrade to test that will let it worked with the arduino hack again. If anyone can get me the right order for the pins so I can test it I will share the downgrade with them.
By kuerten
#55692
Well i m a bit Desperate this is my storie:

I have bought this controller on Ali:
https://fr.aliexpress.com/item/40003004 ... 6c37YoUt16

I know i should have bought an 500w (my mistake)

So i have plugged all cables and follow carrefully all thread from this post:

1/ First it was working like a charm i have rid for a 10km ride no issue :D :D
2/ After I did ride a bit longer but with lof of slope and the controler was quite hot and I get a E10 error and throttle not working (could not make it work) :evil: :evil:

I switch it off during 2 houurs cool down and it works again :shock:


I think there were an issue so i did :
a) the green study cable = nothing still I got ta E07 error
b) inversed the green and blue line from motor line - it works and then motor vibrating violently
so I have tried all combination of the 3 colors (blue yellow green)

c) and then again : E07 error

Now :
Nothing is working anymore ! :roll:
When i switch it on it make like a TIC TIC TIC sounds from the wheels motor and i get stuck with E07 error
when i activate the throttle it makes again the TIC TIC TIC sounds?

Did I make something wrong?

If anyone could help me who have a better solution?


This is all my wired cables
I have remove tape from some of them to better see and I have add WAGGO in order to make the cable switch from motor lines

VIDEOS

this is all setting from LCD parameters:
https://streamable.com/w8egsu

this is my wiring (i have respect all matching colors):
https://streamable.com/w5d2dj
https://streamable.com/zin9bb

ON THIS VIDEO YOU CAN HEAR THE TIC TIC TIC SOUNDS:
https://streamable.com/lg3f65






PHOTOS:

Image

Image

Image

Image

Image

Image

Image

Image
By almiz
#56018
What controller is recommended to buy?
I read in thread and I'm confused and I dont want to damage the motor, so maybe someone can help please?
  • 36V 250W
  • 36V 350W
  • 36V 500W
By Doc95
#56035
almiz wrote:
Fri Nov 12, 2021 11:00 pm
What controller is recommended to buy?
I read in thread and I'm confused and I dont want to damage the motor, so maybe someone can help please?
  • 36V 250W
  • 36V 350W
  • 36V 500W
36v 350w worked for me
By almiz
#56042
How do you remove the panel in the frame where the existing controller is behind it? I cut around the gap and tried with a screwdriver but it wont open. How to get this panel off?
By k3yzortv
#57072
hi guys i am in possession of a

-bird zero (es-100) buy in waste.
Image
- an arduino nano
Image
-a st-lnk v2
Image
-gps removed


I miss the procedure for starting :lol:



if you have information on the procedure to follow for the conversion with the source material :roll: :!: :oops:
User avatar
By mwrc
#58143
Or maybe it will be easier to modify the original software or upload another one?

Why buy more controllers and make more electronic waste?

Sorry for my English, I use a translator.
Image

  • 1
  • 52
  • 53
  • 54
  • 55
  • 56

:shock: Hello Street I found a battery and som[…]

https://i.imgur.com/p781HhU.jpeg https://i.imgu[…]

I am so late for the news, Superped/Link probably […]

SNSC 2.4

Have you tried running a patched firmware like dra[…]