Re: COVERT A WHEELS BIKE?
Posted: Mon Mar 23, 2020 11:09 pm
I've mentioned before on one of these blogs associated with the wheels bike hopefully trying to locate someone with enough brains to collaborate with my findings but for some reason my account just went MIA and the post went with it but anyways, the bike has three communication options not counting the bs iot pay to ride gps box. It has a classic Bluetooth board that has the colored lights connected to it that does nothing and can't do sh*t but play your music then it has a Low energy BLE 4.0 chip that's the little square chip located on the PCB board that the throttle wires are ran from. Prior to me mentioning that they had left the chip name the default name (wtf ever China co.) It pointed me to research (not a easy find) a long form pdf data sheet associated with the chip and that's when I seen that it also had a factory default password. So figuring these wag people done cut every other corner (definitely not saving sh*t) I figured they may have left the password at default and I found that they did. Either 111111 or 123456 or 000000 but I done a test on a more recent one and noticed that they are not left at default status anymore. A quick fix for that is to simply unplug power source ( I mean definitely unplug it) don't call yourself Mr. Steady hands bc it is one touchy biych and the very smallest error and it's fuckedd. Any ways unplug board and take a paper clip (pipe scrapper at my place) and bend it accordingly to use to bridge pin 1 to pin 9 for 30 second then remove bridge power off bike then once you power back on then the password will be returned to default . You can't just use any app to connect either because you have to be able to pair and bond in order to make / manipulate any changes. It has to be a ble low energy apk. It needs to give option to pair then prompt option to bond. Anyways I dropped my research giving minor heart to the corner cutting co. And wife yelling about my weird Hobby's that made me not want to research how to send the AT commands and uuid codes and all that sh*t. Also if you bridge pin 1 (3.7v pin) to pin 9 (Reset pin) 15 seconds should do a soft reset ( "recommend" but may not help but 30 seconds or more creates a hard reset "full factory reset on the ble chip. Also you only have 30 seconds to make bridge ( connect pin 1 to 9) after power on otherwise reset option is locked. Hopefully one of you smart bastards figure some sh*t out. Also 3rd chip is behind lcd FM107520 that's where I think the money is at. I would say at a $1 chip cost it would be simple to heat remove replace and ride on. Later people love your help thanks