- Mon Dec 16, 2019 8:10 am
#18171
Hi
I've an m365 standard with PRO dash conversion.
Since 2 weeks and ~200km of driving, i have a clunking noise under scooter, like a bearing issue from here:https://www.youtube.com/watch?v=-Y1XnlSrWRU
I've replaced both bearings front/rear as I thought this is the issue but is seems it was not.
the clunk sound is only for first 1-2 kilometers and afterwards no clunking sounds. Also the top speed was reduced from 29-30km/h to 26-27km/h. same custom firmware, same weight, same road, battery fully loaded - 42,2V
From what i could notice, the sounds is coming from ESC controller or at least that zone..
tried also with original firmware....put the scooter upside down and folded, the sound is there..so no locking mechanism in place..
any thoughts?
thanks
I've an m365 standard with PRO dash conversion.
Since 2 weeks and ~200km of driving, i have a clunking noise under scooter, like a bearing issue from here:https://www.youtube.com/watch?v=-Y1XnlSrWRU
I've replaced both bearings front/rear as I thought this is the issue but is seems it was not.
the clunk sound is only for first 1-2 kilometers and afterwards no clunking sounds. Also the top speed was reduced from 29-30km/h to 26-27km/h. same custom firmware, same weight, same road, battery fully loaded - 42,2V
From what i could notice, the sounds is coming from ESC controller or at least that zone..
tried also with original firmware....put the scooter upside down and folded, the sound is there..so no locking mechanism in place..
any thoughts?
thanks