[yesbuddy]

Hello, has anyone got experience with these purple clone dashboards working with original controllers?
https://imgur.com/a/S8UnwSh?spm=a2g0s.i ... 3e5fDJKopG

[DanielNTX]

I got a purple one and after the BLE flash using a ST-LINK it never worked correctly with display. Had to return it.

[ercintorun]

before upgrading my m365 classic, i first upgraded its driver to 1.5.5 using mi.cfw.sh generator like an m365 pro. Then connected the purple board and it worked. But i had some stuttering problems in D and S mode

The board itself let me change/upgrade bms or driver using downg app but it was not possible to update BLE (it seems like it is working but it is not changing). These lilac/purple boards have a different architecture (tm1637 chip, legs different etc) then m365 pro original/clone boards.

By default ble version shows as 910. You could change the BLE to 090 with st-link using correct hex file which you can find here

https://electro.club/forum/m365_pro_ble ... iya?page=2

https://electro.club/data/forum/message ... Purple.zip

pin connections are at the back. The order is:
3.3v - SWDIO- SWDCLK - GND

After upgrading ble to 090 all my problems gone.

You can not use camialfa v74 BLE files etc. since architecture is different.


BMS 126 (7800mah) you can find here:

https://mp365.es/recursos/centro-de-des ... 365-y-pro/