Page 1 of 1

Anyone have the screw size for the dashboard

Posted: Sat Jul 06, 2019 11:59 am
by Whiteferrett
I need new screws for a dashboard and I can't find that information anywhere... I'm talking about the three silver screws that hold the dashboard in

Re: Anyone have the screw size for the dashboard

Posted: Sat Jul 06, 2019 7:01 pm
by LAskooter213
Metric phillips head. Needs to be metric, not standard or you will strip it.

Re: Anyone have the screw size for the dashboard

Posted: Thu Jul 11, 2019 1:31 pm
by kg4usk
Whiteferrett wrote:
Sat Jul 06, 2019 11:59 am
I need new screws for a dashboard and I can't find that information anywhere... I'm talking about the three silver screws that hold the dashboard in
Not sure of the size, but I ordered these...

https://www.ebay.com/itm/3-Circuit-Boar ... SwZ6hczQva

Wish I could get some with hex or torx heads instead of phillips.

Re: Anyone have the screw size for the dashboard

Posted: Thu Jul 11, 2019 1:43 pm
by Freebird
If you have any old junk electronics like laptops, DVD players etc, you can harvest short screws from the internal boards.

Re: Anyone have the screw size for the dashboard

Posted: Fri Jul 12, 2019 9:57 am
by JonDon
You need M2x10 screws (anything between 6-15mm length should be fine) to fix the Xiaomi M365 dashboard.

Re: Anyone have the screw size for the dashboard

Posted: Fri Jul 12, 2019 11:00 am
by jaysonjehsen
Can confirm, M2 is exactly the thread type, and around 10mm long is just about right. Just did the screw in yesterday