Page 1 of 1

HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Sat Jun 08, 2019 8:07 pm
by khoaofgod
hi,
I bought 2 M365 these could not fold.
I uploaded a photo, there look like 5 screws, I took out 4 with the hex tool.
Image

The 5th one, I tried many tools , I have but I could not take it out :(

Anyone help, I need to take out the pole and then replace that part with this part,
to make my M365 become folding.
https://www.amazon.com/gp/product/B07P8TSN16

Re: HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Wed Jun 12, 2019 4:56 pm
by Slydingphantom
Read some of the other thread and you will find.

Drill that out.

Re: HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Wed May 06, 2020 1:23 pm
by Bradmallia
Did you get this out? I’m sat here currently in same situation and cannot remove it...

Re: HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Thu May 07, 2020 11:09 am
by JonDon
The thing in the middle is a rivet, not a screw.
Use a chisels to knock of the head of the rivet, then it can be easily removed.

Re: HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Wed Jul 08, 2020 4:59 am
by bluem6
Is the folding part all that is require to convert it to fold?

Folding part

Re: HELP!! M365 Remove the Non-Folding and put on a folding part

Posted: Sun Sep 20, 2020 2:02 pm
by JonDon
bluem6 wrote:
Wed Jul 08, 2020 4:59 am
Is the folding part all that is require to convert it to fold?

Folding part
Yes!